1. United States
  2. All 3M Products
  3. Electrical
  4. Splices & Accessories
  5. Resin Joints & Splices
  6. 3M™ Scotchcast™ Wye Resin Splice kit 90-B1N, 0 - 600 V, 10/Case

3M™ Scotchcast™ Wye Resin Splice kit 90-B1N, 0 - 600 V, 10/Case

  • Part Number 90-B1N
  • 3M ID 7100123109
  • UPC 00051128613467
Voltage 1 kV
Conductor Sizes (Imperial) 2/0 AWG
Insulation Outside Diameter Range 0.50 - 0.812 Inch
Maximum Insulation Outer Diameter (Metric) 20.1 mm
Minimum Insulation Outer Diameter (Imperial) 0.5 in
Maximum Insulation Outer Diameter (Imperial) 0.812 in

Designed for use on non-shielded cables

Insulates and seals wye splices for compression tap connectors

Fits both split bolt and crimped conductors

View more details

Details

Highlights
  • Designed for use on non-shielded cables
  • Insulates and seals wye splices for compression tap connectors
  • Fits both split bolt and crimped conductors
  • RoHS 2011/65/EU Compliant
  • RoHS 2011/65/EU Compliant

3M™ Scotchcast™ Wye Resin Splice Kits are designed for insulating and sealing wye splices for compression tap connectors on power cables.

Insulates and seals wye splices for compression tap connectors (e.g., C tap or H tap) rated for cables up to 5 kV. Number of Conductors: 1 for 5 kV Multiple for 1 kV

Typical properties

Application

Sealing, electrical insulation and mechanical protection

Brands

Scotchcast™

Cable Shielding

Non-shielded

Cable Type

Power Cable

Conductor Amount

Multiple, Single

Conductor Sizes (Imperial)

2/0 AWG

Dielectric Strength

500 mV

For connection of paper - with plasticinsulated cables

No

Insulation O.D. Range

0.50 - 0.812 Inch

Insulation Outside Diameter Range

0.50 - 0.812 Inch

Material

Epoxy

Maximum Cable Outside Diameter

1/2-13/16

Maximum Conductor Size (Imperial)

4/0 AWG

Maximum Conductor Size (Metric)

70 mm²

Maximum Insulation Outer Diameter (Imperial)

0.812 in

Maximum Insulation Outer Diameter (Metric)

20.1 mm

Minimum Conductor Size (Imperial)

1/0 AWG

Minimum Conductor Size (Metric)

50 mm²

Minimum Insulation Outer Diameter (Imperial)

0.5 in

Minimum Insulation Outer Diameter (Metric)

12.7 mm

Model

Cast Resin

Product Color

Black

Product Series

90-B1 Series

Product Type

Resin Splice

Run Cable Outside Diameter Range

0.500 to 0.812 Inch

Shelf Life

36 Month

Splice Type

Resin

Tap Insulation Outside Diameter

0.375 in

Voltage

1 kV

Voltage Application

Low Voltage

Resources

Safety Data Sheets

Document Number: MSDS_3641040_US_EN

(PDF)

Similar products

Voltage 1 kV
Conductor Sizes (Imperial) 2/0 AWG
Insulation Outside Diameter Range 0.50 - 0.812 Inch
Maximum Insulation Outer Diameter (Metric) 20.1 mm
Minimum Insulation Outer Diameter (Imperial) 0.5 in
Maximum Insulation Outer Diameter (Imperial) 0.812 in
Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.