3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8825NS is a low-odor, non-sag, toughened, two-part acrylic adhesive. This adhesive is an ideal choice for a wide variety of industrial and commercial applications.
Non-Sag with Excellent Impact Strength
Making work safer, faster, and more efficient, that's just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8825NS. With a 10:1 mix ratio and a 23 minute work life there's time to position substrates prior to adhesion. Once fully cured it will reach 1,000 psi (7 MPa) of overlap shear strength in about 53 minutes, increasing throughput and productivity while featuring high peel and impact performance.
With lower odor and non-flammable properties, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8825NS contributes to a safer work environment compared to typical acrylic adhesives. Added non-sag properties assure the adhesive is applied exactly where you want it and won't migrate during the application or bonding processes. And the 18-month room temperature shelf life of the product simplifies inventory management.
Recommended Applications
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8825NS has been recognized by Underwriters Laboratories (UL) for use in electrical equipment and electric signs. Please review UL File QOQW2. MH17478 and Sign Components Manual (SAM) File E464624 for details.
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8825NS Green should yield similar results as 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8810NS Green, which has been tested for surface flammability, smoke, toxic gas generation, and caloric content per ASTM E162, ASTM E662, ASTM E1354, Bombardier SMP 800-C, and Boeing BSS 7239 test methods
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life..
| Adhesive Type | Acrylic |
| Application | Impact Resistance |
| Brands | Scotch-Weld™ |
| Container Size (Imperial) | 16.57 fl oz |
| Container Size (Metric) | 490 mL |
| Design Challenges | Noise Vibration & Harshness Control NVH, Impact & Shock Absorption |
| Features | Low Odor |
| Full Cure Time | 24 hr |
| Industries | Specialty Vehicle, Metalworking, Woodworking, Signage |
| Performance Level | Best |
| Product Form | Cartridge |
| Set Time | 25 min |
| Smallest Saleable Unit | Each |
| Storage Temperature (Celsius) | 21°C |
| Storage Temperature (Fahrenheit) | 70 °F |
| Surface Type | Oily, Smooth |
| Volume (Imperial) | 17.25 fl oz |
| Volume (Metric) | 490 mL |
| Work Life | 22 - 24 min |
Other
(PDF, 102KB)
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8825NS Green