Contact a Sales Rep
Thank You!
Your form was submitted successfully.
Our Apologies...
An error has occurred while submitting. Please try again later...
3M™ Heat Shrink Cable Sleeve ITCSN is a heavy wall sleeve that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio to offer electrical insulation for 1 kV rated applications. It features a cross linked polyolefin construction that provides moisture seal protection.
3M™ Heat Shrink Cable Sleeve ITCSN is a split resistant sleeve with a factory applied adhesive/sealant that offers reliable performance for electrical splices, connections and terminations. It is perfect for insulating secondary splices, direct buried, submersible or dig in repairs, as well as physical protection of high voltage, air insulated connectors or lugs. It withstands temperatures of 67 to 230 degrees F ( 55 to 110 degrees C). UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.
Adhesive Lined | Yes |
Adhesive Material | Hot melt adhesive layer, Hot-melt adhesive |
Brands | 3M™ |
Cable Size Range | 8-1/0 AWG |
Case Quantity | 100 |
Chemical Resistant | Yes |
Dielectric Strength (V/mil) | 500 V/mil |
Direct Bury | Yes |
Elongation | 4.75 % |
Expanded Inner Diameter | 0.8 in |
Expanded Inner Diameter (Metric) | 20.3 mm |
Flame Retardant | No |
Flammability Rating | Non-Flame Retardant |
Heat Shrink Type | Adhesive-Lined Polyolefin Heat Shrink Tubing |
Inner Diameter After Shrink (Imperial) | 0.2 in |
Inner Diameter After Shrink (Metric) | 0.508 cm² |
Inner Diameter Before Shrink (Imperial) | 0.8 in |
Inner Diameter Before Shrink (Metric) | 2.032 cm² |
Material | Adhesive-lined Polyolefin |
Maximum Operating Temperature (Celsius) | 100 ℃ |
Maximum Operating Temperature (Fahrenheit) | 230 ℉ |
Maximum Voltage Rating | 1 kV |
Minimum Expanded Tubing I. D. | 0.8 in |
Minimum Shrink Temperature (Celsius) | 121 ℃ |
Minimum Shrink Temperature (Fahrenheit) | 250 °F |
Non-Corrosive | Yes |
Operating Temperature (Celsius) | -55 to 100 Degrees Celsius |
Operating Temperature (Fahrenheit) | -67 °F to 230 °F |
Operating Temperature Range (Celsius) | -55 °C to -100 °C |
Operating Temperature Range (Fahrenheit) | -67 °F to 230 °F |
Product Color | Black |
Product Type | Splice |
Recovered Inner Diameter | 0.2 in |
Recovered Inner Diameter (Metric) | 5.1 mm |
Shrink Ratio | 4:1 |
Solution for | Access Network: FTTH/FTTB/CATV, Access Network: xDSL, Long-haul/Metro Loop Network: Outdoor, Wireless Network: Backhaul |
Specifications Met | UL 486D* |
Splice Type | Heat Shrink |
Tensile Strength (Imperial) | 2400 Pound-Force Per Square Inch |
Tubing Type | Heavy Wall |
Units per Case | 100.0 |
Voltage | 1 kV |
Voltage Rating | UL Rated to 600 V (Shall not exceed 1 kV) |
Overall Length (Imperial) | 6 in |
Overall Length (Metric) | 152.4 mm |
Regulatory Data Sheet
Document Number: MSDS_3992351_US_EN_RDS
(PDF)
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.