3M™ Cold Shrink Sheath Seal 5841, 2-4/0 AWG (35-100 mm²), 1/case
- Part Number 5841
- 3M ID 7000031456
- UPC 00054007122913
Details
Highlights
- Requires no heat
- Seals the sheath area for 3-conductor cables without ground wires
- Handles conductors of size 2 to 4/0 AWG
- RoHS 2011/65/EU Compliant
3M™ Cold Shrink Sheath Seal Kit contains all the accessories required for sealing the break out for 3 conductor cables without ground wires.
3M™ Cold Shrink Sheath Seal Kit has sufficient materials to make a single 3 conductor break out. RoHS 2011/65/EU Compliant. They handle both copper and aluminium cables from 2AWG-500 kcmil (35-250 mm²). No heat is required when using these kits. Each kit makes one seal.
Typical properties
| Brands | 3M™ |
| Conductor Sizes (Imperial) | 2 - 4/0 AWG (35 - 100 mm²) |
| Inner Diameter After Shrink (Imperial) | 1.2 in |
| Inner Diameter After Shrink (Metric) | 30.5 mm |
| Inner Diameter Before Shrink (Imperial) | 1.9 in |
| Inner Diameter Before Shrink (Metric) | 48.3 mm |
| Insulation O.D. Range | 0.30 - 1.18 in |
| Insulation O.D. Range (Metric) | 7.6 - 30.0 mm |
| Insulation/Jacket O.D. Range | 1.20 - 1.90 in |
| Insulation/Jacket O.D. Range (Metric) | 30.5 - 48.3 mm |
| Maximum Conductor Size (Imperial) | 4/0 AWG |
| Maximum Conductor Size (Metric) | 100 mm² |
| Maximum Jacket Outside Diameter | 1.9 in |
| Maximum Jacket Outside Diameter (Metric) | 48.3 mm |
| Minimum Conductor Size (Imperial) | 2 AWG |
| Minimum Conductor Size (Metric) | 35 mm² |
| Units per Case | 1.0 |
Resources
Safety Data Sheets
Document Number: MSDS_2632578_US_EN
(PDF)
Similar products
| Inner Diameter After Shrink (Metric) | 30.5 mm | ||
| Inner Diameter Before Shrink (Metric) | 48.3 mm | ||
| Inner Diameter After Shrink (Imperial) | 1.2 in | ||
| Inner Diameter Before Shrink (Imperial) | 1.9 in | ||
| Insulation/Jacket O.D. Range | 1.20 - 1.90 in |
3M™ Cold Shrink Sheath Seal 5841, 2-4/0 AWG (35-100 mm²), 1/case
3M™ Scotchcast™ M-Series Cable Repair Kits
3M™ Sheath Seal Kits 5831 and 5832Legal disclaimer
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
