3M™ Particulate Filter 5P71, P95, 5-pairs of Filters

The replaceable layer that helps block out spray paint, pesticide, and other particles, the 3M™ Particulate Filter P95 is your go-to replacement for your 3M™ Paint Project Respirator. For professional use only, this filter is easy to install and will have you back on the job in a snap. When your filter becomes dirty, damaged or difficult to breathe through, replace with the trusted protection of the 3M™ Particulate Filter P95. Contains 10 filters and is for use with 3M™ 501 filter retainer on 3M™ 5000 and 6000 series Cartridges Only. NIOSH approved: P95.

The 3M™ Particulate Filter 5P71, P95 helps reduce exposure to certain particles from paint spraying*, spray adhesives and pesticides**. This filter is a replacement filter solution for the 3M™ Performance Reusable Paint Project Respirator.  This NIOSH-Approved P95 respirator filter provides at least 95% filtration efficiency against solids and liquid aerosols, as well as oil-based particulates. It can be attached to 3M™ 5000 series respirators and 3M™ 6000 series cartridges by using a 3M™ Filter Retainer 501. This pack contains 3-pairs of 3M™ Particulate Filter 5P71, P95 Filters. *Use with 3M™ 5000 series respirators or 3M™ 6000 series cartridges with a 3M™ Filter Retainer 501. *One 3M™ 5P71 filter must be installed over each cartridge to filter particles such as from spray. **Refer to Pesticide Product Label for Respirator Guidance or call 3M at 1-800-243-4630 or in Canada, call 1-800-267-4414.   WARNING: Workplace/Occupational Applications: Use under a government-compliant respiratory protection program (e.g., OSHA). This respirator helps protect against certain airborne contaminants. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M in USA at 1-800-243-4630. In Canada, call 1-800-267-4414.