Use the 3M™ Secure Click™ Quantitative Fit Test Adapter FF-800-03 to conduct quantitative fit testing on 3M™ Secure Click™ Full Facepiece Reusable Respirator FF-800 Series.
The 3M™ Secure Click™ Quantitative Fit Test Adapter FF-800-06 consists of a fit test adapter with port that is installed on a 3M™ Secure Click™ Full Facepiece Reusable Respirator FF-800 Series. The FF-800-06 fit test adapter is installed where the speaking diaphragm is normally assembled. Fit test tubing can then be inserted onto the fit test port. After performing the quantitative fit test, remove the 3M Secure Click Quantitative Fit Test Adapter FF-800-06 and reassemble the 3M Secure Click Full Facepiece Reusable Respirator FF-800 Series per the User Instructions prior to using in a contaminated environment.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. If this product is being purchased for use in firefighting duties, please review this Notice Regarding Fluorinated Organic Compounds.