3M™ Three Conductor Termination Kits Qt-Iii 7600 Series 7696-T-150-3 g
- Part Number 7696-T-150-3G
- 3M ID 7100165383
- UPC 00051128595329
Details
Highlights
- Provides a void-free seal to tape shield, wire shield and UniShield® power cables
- High dielectric-constant material regulates the distribution of electric field stress
- Suitable for indoor applications
- Termination has 1.53 to 1.81-in insulation O.D. and 5.40-in maximum cable O.D
- Accommodates wire sizes 1000 kcmil at 15kV 133%, 750 kcmil at 25/28 kV 100%, 500 to 750 kcmil at 25/28 kV 133%, 500 to 750 kcmil at 35kV 100%, 350 to 750 kcmil at 35kV 133%
- Silicone rubber insulation offers durability and reduces leakage currents in damp conditions
- Withstands voltages of 5 to 35kV and is 150 kV BIL-rated
- Includes a non-skirted, 3-phase, cold shrink termination
- IEEE Approved
3M™ Cold Shrink QT-III 7600-T-3G Series Termination Kit includes a non-skirted, 3-phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield® power cables. The silicone rubber sealing compounds allow the termination to withstand voltages of 5 to 35kV.
3M™ Cold Shrink QT-III 7600-T-3G Series Termination Kit is designed for terminating medium voltage, 3/C-shielded, 3-conductor cables with internal ground wires. The UV stable, track-resistant and hydrophobic construction makes the termination suitable for indoor applications. The lower surface stress, high dielectric-constant material offers an optimized BIL performance while ensuring a leak-proof, compact fit. IEEE Approved.
Typical properties
| BIL | 150 kV |
| Brands | 3M™ |
| Breakout Boot | Yes |
| Cable Insulation Outside Diameter Range | 1.53-1.81 in |
| Cable Insulation Outside Diameter Range (Metric) | 38.8-46.0mm |
| Cable Shielding | Tape Shield, UniShield®, Wire Shield |
| Case Quantity | 1 |
| Conductor Sizes (Imperial) | 350 kcmil, 400 kcmil, 500 kcmil, 600 kcmil, 700 kcmil, 750 kcmil, 800 kcmil, 900 kcmil, 1000 kcmil |
| Indoor/Outdoor | Indoor Non-skirted |
| Insulation Level | 100%, 133% |
| Insulation Outer Diameter (Imperial) | 1.53 in, 1.55 in, 1.56 in, 1.57 in, 1.58 in, 1.59 in, 1.6 in, 1.61 in, 1.62 in, 1.63 in, 1.64 in, 1.65 in, 1.66 in, 1.67 in, 1.68 in, 1.69 in, 1.7 in, 1.71 in, 1.72 in, 1.73 in, 1.74 in, 1.75 in, 1.76 in, 1.77 in, 1.78 in, 1.79 in, 1.8 in, 1.81 in |
| Insulation Rejacketing | Yes |
| Lug/Stem Connector Included in Kit | No |
| Maximum Cable Outside Diameter | 5.40 in |
| Maximum Cable Outside Diameter (Metric) | 137.2 mm |
| Maximum Installed Length | 16.00 in |
| Maximum Installed Length (Metric) | Termination only (not including RJS sleeving or Break-out boot: 546mm) |
| Number of Conductors | 3 |
| Product Series | 3-RJS |
| Voltage | 15 kV, 25 kV, 35 kV |
Resources
Safety Data Sheets
Document Number: MSDS_2652436_US_EN
(PDF)
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
