3M™ Flexomount Plate Tape 447, Gray, 10 mil, Roll, Config
- Part Number 447
- 3M Product Number 447
- 3M ID 7100132848
Details
Highlights
- Offers excellent adhesion to both rubber and photopolymer plates
- Provides uniform coverage of solids when halftone dot reproduction is not critical
- Specially formulated for clean removal from plate and print cylinder or sleeve
- High adhesion helps reduce plate edge lifting
3M™ Flexomount™ Plate Mounting Tape 447 is a single liner, double coated tape designed for mounting photopolymer and rubber printing plates to flexographic printing cylinders or sleeves. The adhesive is specially formulated for clean removal from both the plate and the print cylinder or sleeve.
- Mounting photopolymer print plates to flexographic printing cylinders or sleeves
- Mounting rubber printing plates to flexographic printing cylinders or sleeves
| Product Number | Application Thickness Inches (mm) | Manufactured Target Thickness Inches (mm) | Description | Plates | Cylinders | Color | Features | |
|---|---|---|---|---|---|---|---|---|
3M™ Solid Printing Tapes |
400 Series — 3M™ Flexomount™ Solid Plate Mounting Tape | |||||||
| 411DL, 411 | 0.015 (0.38) | 0.015 (0.38) | Gray double coated tape with a soft rubber adhesive on each side of a vinyl carrier. Available in single and double liner. | P/R | SS/SL | Gray | Gray vinyl tapes with high adhesion. Helps reduce edge lifting. Helps minimize pin holing on solid work. | |
| 412DL, 412 | 0.020 (0.51) | 0.020 (0.51) | P/R | SS/SL | Gray | |||
| 447DL, 447 | 0.010 (0.25) | 0.010 (0.25) | P/R | SS/SL | Gray | |||
| 413DL | 0.015 (0.38) | 0.015 (0.38) | Black double coated tape with a firm rubber adhesive on each side of a vinyl carrier. Available only in double liner. | P/R | SS/SL | Black | Black vinyl with lower adhesion. Higher temperature and solvent resistance. Helps minimize pin holing on solids. | |
| 414DL | 0.020 (0.51) | 0.020 (0.51) | P/R | SS/SL | Black | |||
Keep the Presses Running and your Customers Coming Back
For decades, our products have been at work in paper mills and printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done. From paper web splicing to plate mounting and packaging the finished job, you can rely on us for solutions and service throughout your operation.
Click here for more information on Flexographic Mounting Systems (PDF, 5.00 Mb)
Typical properties
Resources
Reviews
Large Volume Order
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
