3M™ Cloth Roll 947D, 80 X-weight, Config
- 3M Product Number 947D
- 3M ID 7100053099
Details
Highlights
- An abrasive used for metal finishing and stock removal
- X-weight cloth backing for finishing and grinding
- Blended ceramic grain offers excellent cut-rate and life for better performance
- Resin bonding resists deterioration from heat, extending the life of the abrasive cloth
- Flexible cotton material conforms to contoured parts for consistent finishing
- Closed coat provides greater grain density and finer finish on hard surfaces
3M™ Cloth Roll 947D is an abrasive sanding cloth used to create abrasive belts and rolls for metalworking. It is constructed on an X-weight cloth backing that features closed coat construction for excellent sanding action. The blended ceramic abrasive grains and flexible backing make this cloth ideal for product applications such as metal surface finishing and stock removal.
High-Quality Construction
3M™ Cloth Roll 947D is used to create abrasive belts and rolls best suited for metal sanding and finishing thanks to its durability and fast-cutting abrasive material. Its flexible, X-weight cloth backing provides smooth operation and durability that can conform to the shape of contoured parts for consistent finishing. The abrasive side features closed coat mineral construction for finishing and sanding on steel, stainless steel and other types of metals.
Blended Ceramic Grains
3M™ Cloth Roll 947D is engineered using 3M™ ceramic materials, which enhance the toughness and hardness of the grain. Ceramic blend products feature aluminum oxide blended with ceramic grain for a harder, longer-lasting abrasive. Perfect for stock removal, ceramic abrasives are engineered to fracture frequently for a super-fast cut that can handle heat and most grinding applications. Ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability and makes abrasives made from 3M™ Cloth 947D an excellent choice for light to moderate stock removal and surface preparation.
Heat Resistant and Fast Cutting
This abrasive cloth also uses resin bonding which is specially designed to resist thermal and chemical deterioration, which can occur during sanding. The resin bond is also very tough and excellent for precision work on all types of metals. This also allows for fast sanding and a high cut-rate. Closed coat construction features a dense spread of abrasive grains across the surface of the cloth. This design cuts fast and is ideal for light deburring or producing a grain pattern for a consistent finish.
Typical properties
Resources
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
