3M™ Hi-Strength 94 ET Adhesive Bulk creates an aggressive postformable bond for attaching decorative laminate, metal and some rubber substrates. This high strength adhesive is typically used in woodworking and specialty vehicle applications, especially where VOCs are a concern. The adhesive can be sprayed, rolled or brushed onto surfaces to reduce overspray and adhesive waste.
3M™ 3M™ Hi-Strength 94 ET Adhesive Bulk holds strong in critical applications and is often used in marine and specialty vehicle applications to install carpet, rubber or synthetic flooring. The formula's more aggressive tack offers a fast grab with sufficient open time to position and adjust materials before bonding, reducing rework and increasing flexibility. With a solids weight percentage of 20 - 25 and a non-telegraphing spray pattern, this adhesive provides higher coverage with less waste than competing spray adhesives and helps create a uniform hold. As with all contact based adhesives, sufficient and uniform pressure should be applied to ensure a strong bond. This adhesive is CARB* and SCAQMD compliant, GREENGUARD® certified and helps contribute to LEED® credits.
* Meets applicable 2017 California Air Resource Board VOC limits for web spray adhesives.
Recommended Applications
Typical applications in woodworking, transportation, construction and general industrial markets include:
Bringing Better Ideas to the Surface through Science and Innovation
The 3M Industrial Adhesives and Tapes Division applies the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, these technologies help customers deliver competitive products to the market faster and more efficiently.
| Acid Free | No |
| Adhesion | Permanent Mounting |
| Adhesive Type | SBR Rubber |
| Application | Edge Band Wood Panel Bonding, Large Surface Lamination Assembly |
| Application Method | Spray, Roll, Brush |
| Application Temperature From (Celsius) | 15.5 ℃ |
| Application Temperature To (Celsius) | 26.5 ℃ |
| Assembly Type | Large Surface Lamination |
| Brands | 3M™ |
| Container Size (Imperial) | 55 Gallon |
| Container Size (Metric) | 208.2 Liter |
| Container Volume | 54.0 Gal. (US) |
| Creative Color | Clear |
| Cure Temperature | Room Temperature |
| Cure Time | 24 hr |
| Cure or Dry Time | 24 Hour |
| Dispenser | No |
| Environmental Considerations | GREENGUARD® Certified, Low VOC, SCAQMD |
| Features | Permanent Adhesive |
| Flame Retardant | No |
| Hazardous Material Warning | Please note the warnings on the packaging |
| Industries | General Industrial |
| Physical Form | Thin liquid |
| Product Color | Transparent |
| Product Form | Bulk |
| Product Type | Adhesive |
| Shelf Life | 21 Month |
| Smallest Saleable Unit | Drum |
| Solids Weight Percent (Approximate) | 25 % |
| Spray Pattern | Pebble, Lace |
| Surface Type | Laminate, Metal, Wood Veneer, Wood |
| Units per Case | 1.0 |
| Volume (Imperial) | 55 gal |
| Volume (Metric) | 208.198 L |
Safety Data Sheets
Document Number: MSDS_2939817_US_EN
(PDF)
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
