We invented 3M™ Super 77™ Cylinder Multipurpose Spray Adhesive to be an extremely versatile, fast-drying spray adhesive that bonds a wide range of lightweight materials. Our permanent bond provides fast results to keep projects moving ahead. The photo-safe spray formula is easy to dispense and apply directly onto surfaces and materials where needed, with no soak-in or yellowing over time.
The Glue that Holds the World Together
For more than 50 years, 3M™ Super 77 Cylinder™ Multipurpose Spray Adhesive has remained a staple in 3M’s portfolio of go-to, everyday-use adhesives considered by many to be necessary at the factory. Recognized worldwide, this spray adhesive has demonstrated its reliability in countless applications. For many, “getting the job done” is just a spray away.
3M™ Super 77 Cylinder™ Multipurpose Spray Adhesive has an aggressive tack that offers a high initial grab as well as sufficient open time to position materials properly. High-solids content supports its low soak-in property, giving you time to find the best fit for your parts. This attribute also provides higher coverage than competing spray adhesives and helps create soft, non-dimpling glue lines. The combination of fast tack, strong bond and clean appearance make it ideal for projects of all kinds.
Recommended Applications
An All-Around Adhesive
3M™ Super 77 Cylinder™ Multipurpose Adhesive is capable of forming strong bonds on a wide array of materials, including paper, cardboard, fabric and insulation. It also works well with plastic, metal, wood and much more. 3M™ Super 77 Cylinder™ Multipurpose Adhesive- Low VOC <25% is CARB compliant and eligible for LEED credits. This spray adhesive has been proven to work well for projects of all sizes, from crafting to construction.
| Application | Bond Fiberglass Insulation to Metal, Masonry & Plaster Finishes, Drywall Plaster & Gypsum Board, Large Surface Lamination Assembly |
| Application Method | Spray |
| Assembly Type | Large Surface Lamination |
| Brands | Super 77™ |
| Container Size (Imperial) | 29.3 lb |
| Container Size (Metric) | 13.3 kg |
| Environmental Considerations | Helps contribute to LEED® credits |
| Flame Retardant | Flammable |
| Heat Resistance Temperature (Celsius) | 66 °C |
| Heat Resistance Temperature (Fahrenheit) | 150 °F |
| Industries | Construction, General Industrial, Transportation, Packaging, Specialty Vehicle, Woodworking, Furniture |
| Open Time | 1 - 15 min |
| Physical Form | Liquid |
| Product Color | Transparent |
| Product Form | Cylinder |
| Smallest Saleable Unit | Each |
| Solids Weight Percent (Approximate) | 27 % |
| Spray Pattern | Mist |
| Units per Case | 1.0 |
Safety Data Sheets
Document Number: MSDS_2329910_US_EN
(PDF)
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
