3M™ All-Around Autobody Sealant, 08500, 1/10 gal Cartridge, 12 per case
- Part Number 08500
- 3M ID 7000046622
- UPC 00051135085004
Details
Highlights
- ALL-AROUND SEALANT: Medium-bodied, water-based sealer works well for both interior and exterior applications
- STICKS TO COATED SURFACES: Formula adheres well to primed and painted surfaces
- HIGH WORKABLITY: Sealant makes feather-edging easy for a smoother finish
- WATER CLEANUP: Before it dries, excess product can be easily cleaned up with water
- PAINTABLE IN MINUTES: Seals can be painted over after just 30 minutes
3M™ All-Around Autobody Sealant creates quick-drying seal on most interior and exterior automotive body joints and seams. This medium-bodied, water-based seam sealer applies easily and adheres well to properly prepared primer and paint. It may also be smoothed to a featheredge with a wet finger to a smooth, clean appearance.
Quick drying allows painting in 30 minutes
When a firm, tough and water-resistant seal is needed, 3M™ All-Around Autobody Sealant (PDF, 24 Kb) is an ideal choice for its ease of application and excellent performance. Our sealant can be painted in approximately 30 minutes, offers easy water cleanup and will not harm paint. When dry, it resists water, vibration, heat and cold. The sealant may be applied where it is desirable to eliminate solvents (other than water).
Recommended for Tough Environments
This sealer is especially good for customers in hot, dry environments, such as the southwestern United States, because it will not dry as quickly as a solvent based seam sealer.
Suggested applications
- Seal interior and exterior auto body joints and seams
- For hot, dry environments, such as the Southwestern US
Typical properties
| Adhesive Type | Synthetic Elastomer |
| Application | Joint Filling |
| Brands | 3M™ |
| Case Quantity | 12.0 Cartridges per Case |
| Consistency | Paste |
| Container Size (Imperial) | 12.8 fl oz (US) |
| Container Size (Metric) | 378 ml |
| Container Type | Cartridge |
| Dry Time | 60 min |
| Full Cure Time | 1/8 in per 24 Hours @ 70 F and 50% RH |
| Paint Time | 30 Minute |
| Product Color | White |
| Shelf Life in Months (From Date of Manufacture) | 36 |
| Surface Type | Painted Surface |
| Tack-free Time | 25 min - 40 min |
| Work Time | 5 min |
Resources
Safety Data Sheets
Document Number: MSDS_1082767_US_EN
(PDF)
Reviews
Connect with us. We’re here to help.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
