3M™ Trizact™ Hookit™ Foam Abrasive 8000 Disc 443SA
- | Select product options for IDs.
Details
Highlights
- RECOMMENDED APPLICATIONS: Refines 3000-grade and finer sand scratches while dramatically reducing compounding time in paint finishing processes
- PROFESSIONAL FINISHES: Minimizes or eliminates compounding, helping to prevent heavy swirl marks, burn-through, and other defects caused by more aggressive processes
- ENHANCED PERFORMANCE: A foam backing helps ensure proper control and consistent contact with the surface — great for preserving orange peel; use this disc damp for longer life and less loading than dry sanding
- TECHNICIAN-FRIENDLY: Allows technicians to use lighter, dual-action sanders for longer, rather than heavier polishers — as well as requiring less buffing time
- EXPERIENCE THE 3M™ TRIZACT™ DIFFERENCE: The 3M™ Trizact™ 3-dimensional mineral abrasive structures are uniformly distributed with multiple layers, meaning that as the structures wear, fresh, sharp mineral is exposed to keep the results consistent
- A COMPLETE SOLUTION: This disc is part of the 3M™ Perfect-It™ Paint Finishing System and pairs with a variety of Perfect-It™ Brand products to create a range of solutions to deliver fast, defect-free results
- FAST AND EASY DISC CHANGEOVERS: Utilizes a hook and loop-style Hookit™ backing that firmly connects the disc while eliminating the dust and debris contamination that adhesive-backed abrasives can suffer from
- Available in 3-, 5-, and 6-inch diameter discs as well as 2 3/4 x 5 1/2-inch sheets
Shorten or eliminate the compounding stage from your paint finishing process by using 8000-grade 3M™ Trizact™ Hookit™ Foam Abrasive Discs before you polish. Used to refine 3000-grade or finer sand scratches, they leave a surface so smooth you can forget compound and start polishing. They're the industry's first 8000-grade abrasives — built with a 3M technology nobody else has.
Meet paint-finishing's first 8000-grade abrasives, 3M™ Trizact™ Hookit™ Foam Abrasive Discs. They allow body shop technicians to use a lighter sander instead of a heavier polisher for removing 3000-grade and finer sand scratches.
These long-lasting discs are used to refine very fine sand scratches, which were traditionally refined with compound and a pad. They leave a smooth surface and reduce the risk of swirl marks, burn through, and other defects. In many cases, the technician can eliminate compounding and begin polishing.
3M™ Trizact™ abrasives deliver long life and a consistent finish thanks to an exclusive 3M construction. These discs have unique three-dimensional abrasive structures that expose fresh, sharp mineral as they wear.
For best results, we recommend using 3M™ Trizact™ Abrasives with one of our 3M™ Perfect-It™ Paint Finishing systems. However, they can be used before any brand's pads and liquids.
Typical properties
Resources
Reviews
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
