3M™ Corrosion Prevention Sealing Tape 9143FR Tech Data SheetContact a Sales Rep
Our apologies...
An error has occurred while submitting. Please try again later...
Thank you!
Your form was submitted successfully
3M™ Corrosion Prevention Sealing Tape 9143FR
- 3M Product Number 9143FR
- 3M ID B5005378019
Reduce corrosion and costs
3M™ Aircraft Interior Corrosion Prevention and Protection Tapes are designed to help reduce maintenance costs and increase service life of aircraft interior floor systems.
-
The floors of aircraft entryways, galleys, lavatories and cargo compartments are vulnerable to frequent sources of moisture. Fluids from spills and leaks can migrate into the underlying floor support system, and condensation can form on sub-floor structures which can lead to corrosion. The resulting corrosion damage can weaken the entire sub-floor structure and result in costs up to $100,000 per aircraft, in addition to downtime.
Details
Highlights
- Excellent corrosion resistance
- Flame Resistant per 14 CFR 25.853 (a), Appendix F, Part I (a) (1) (ii), 12-second vertical burn¹
- FAA PMA approved
- Helps to protect floor panel metallic support structures from corrosion caused by exposure to fluids in the cabin environment
- Exceptional shop handling
- Cuts easily with scissors or common shop tools
- Repositionable during application
- Easy removal after service with little or no residue
3M™ Corrosion Prevention Sealing Tape 9143FR is a corrosion protection tape that provides a sealing layer between aircraft floor beams and floorboards. When applied to aluminum floor beams and other floor support structures, it helps to protect the metallic support structure from the effects of repeated exposure to fluids. A 43 mil tape, 9143FR offers corrosion resistance for interior aircraft applications, particularly around doors, galleys, lavatories and in the cargo compartment.
-
Corrosion Resistance -
Easy Removal And Application -
Exceptional Shop Handling -
Flame Resistance
-
Do more for your aircraft floors
The floors of aircraft entryways, galleys, lavatories and cargo compartments are vulnerable to frequent sources of moisture. Fluids from spills and leaks can migrate into the underlying floor support system, and condensation can form on sub-floor structures which can lead to corrosion. The resulting corrosion damage can weaken the entire sub-floor structure and result in costs up to $100,000 per aircraft, in addition to downtime.
-
Video Player is loading.
Typical properties
| Adhesion Strength (Imperial) | 27 oz/in |
| Adhesion Strength (metric) | 30 N/100mm |
| Adhesive Type | Low Peel FR Acrylic |
| Application | Corrosion Protection, Surface Protection |
| Backing Material | Polyester |
| Brands | 3M™ |
| Features | Flame Retardant |
| Maximum Operating Temperature (Celsius) | 82 ℃ |
| Maximum Operating Temperature (Fahrenheit) | 180 ℉ |
| Minimum Installation Temperature (Celsius) | 15.0 Degree Celsius |
| Minimum Installation Temperature (Fahrenheit) | 60.0 Degree Fahrenheit |
| Minimum Operating Temperature (Celsius) | -40 ℃ |
| Minimum Operating Temperature (Fahrenheit) | -40 ℉ |
| Product Usage | Aircraft Lavatories, Aerospace, Aircraft Galleys, Aircraft Cargo Compartments |
| Tensile Strength (Imperial) | 36.0 lb/in |
| Tensile Strength (Metric) | 630 N/100mm |
| Total Tape Thickness without Liner (Imperial) | 43 mil |
| Total Tape Thickness without Liner (Metric) | 1.09 mm |
Resources
Data Sheets
(PDF, 356KB)
Connect with us. We’re here to help.
Need help finding the right product for your project? Contact us if you need product, technical or application advice or want to collaborate with a 3M technical specialist 1-800-235-2376
Frequently asked questions
Yes, 9143FR has been developed to provide excellent corrosion protection for metallic support structures in the aircraft cabin and cargo compartments.
Yes 9143FR has been tested in accordance with 14 CFR 25.853 (a), Appendix F, Part I (a) (1) (ii), 12-second vertical burn per FAA Policy Statement PS-ANM-25.853-01-R2, Reference 21, Option 1 (in a stand-alone mode, cut tape sample of nominal size: 3” x 12”) and FAA Policy Statement PS-ANM-25.853-01-R2, Reference 21, Option 3 (bonded to a worst case substrate). Installation approval is the responsibility of the design approval holder or the aircraft owner/operator.
Yes, 9143FR is FAA PMA approved and is listed on 3M Aerospace FAA PMA No. PQOO4414CE, Supplement No. 4.
9143FR is designed to remove cleanly after service.
9143FR is easy to cut with scissors or common tools.
Yes, this data is presented in our 9143FR technical report found here (PDF, 8.5 MB).
This sealing tape is approved for application on a large selection of aircraft makes and models. For specific details, please see the supplement found here (PDF, 353 KB).
Similar products
| Adhesion Strength (Imperial) | 27 oz/in | |||
| Adhesion Strength (metric) | 30 N/100mm | |||
| Adhesive Type | Low Peel FR Acrylic | |||
| Application | Corrosion Protection, Surface Protection | |||
| Backing Material | Polyester | |||
| Brands | 3M™ | |||
| Features | Flame Retardant | |||
| Maximum Operating Temperature (Celsius) | 82 ℃ | |||
| Maximum Operating Temperature (Fahrenheit) | 180 ℉ | |||
| Minimum Installation Temperature (Celsius) | 15.0 Degree Celsius | |||
| Minimum Installation Temperature (Fahrenheit) | 60.0 Degree Fahrenheit | |||
| Minimum Operating Temperature (Celsius) | -40 ℃ | |||
| Minimum Operating Temperature (Fahrenheit) | -40 ℉ | |||
| Product Usage | Aircraft Lavatories, Aerospace, Aircraft Galleys, Aircraft Cargo Compartments | |||
| Tensile Strength (Imperial) | 36.0 lb/in | |||
| Tensile Strength (Metric) | 630 N/100mm | |||
| Total Tape Thickness without Liner (Imperial) | 43 mil | |||
| Total Tape Thickness without Liner (Metric) | 1.09 mm |
3M™ Corrosion Prevention Sealing Tape 9143FR
3M™ Polyurethane Protective Tape 8663DL
3M™ Polyurethane Protective Tape 8657DL
3M™ Polyurethane Protective Tape 8658DLDisclaimer
¹ Tested in accordance with 14 CFR 25.853 (a), Appendix F, Part I (a) (1) (ii), 12-second vertical burn per FAA Policy Statement PS-ANM-25.853-01-R2, Reference 21, Option 1 (in a stand-alone mode, cut tape sample of nominal size: 3” x 12”) and FAA Policy Statement PS-ANM-25.853-01-R2, Reference 21, Option 3 (bonded to a worst case substrate). Installation approval is the responsibility of the design approval holder or the aircraft owner/operator.
