3M™ Hi-Strength Postforming Adhesive 94 CA Bulk is a strong adhesive that bonds a range of large surfaces and is perfect for large-scale laminations. This adhesive’s formula is easy to dispense and apply directly onto surfaces, with no soak-in or yellowing over time.
Fast-Acting, Long Lasting
3M™ Hi-Strength Postforming Adhesive 94 CA Bulk is a long-time member of 3M’s portfolio of go-to, everyday-use adhesives considered by many to be necessary at the factory.
For extended open bond time of up to one hour, we recommend 3M™ Hi-Strength 94 ET Adhesive.
We designed 3M™ Hi-Strength Postforming Adhesive 94 CA Bulk to have an aggressive tack that offers a high initial grab as well as sufficient open time to position materials properly. High-solids content supports its low soak-in property, giving you ample time to align your insulation properly. This attribute also provides higher coverage than competing adhesives, alongside its 15-minute bonding range. The combination of fast tack, strong bond and clean appearance make it ideal for large woodworking projects for your business.
Recommended Applications
This solvent based adhesive is GREENGUARD certified and meets California and OTC state VOC requirements. It is available in aerosol, cylinder or bulk packaging.
| Acid Free | No |
| Adhesion | Permanent Mounting |
| Adhesive Type | SBR Rubber |
| Application | Edge Band Wood Panel Bonding, Large Surface Lamination Assembly |
| Application Method | Brush, Spray, Roll |
| Application Temperature From (Celsius) | 15.5 ℃ |
| Application Temperature To (Celsius) | 26.5 ℃ |
| Assembly Type | Large Surface Lamination |
| Brands | 3M™ |
| Container Size (Imperial) | 5 Gallon, 55 Gallon |
| Container Size (Metric) | 20 Liter, 208.2 Liter |
| Creative Color | Clear |
| Cure Temperature | Room Temperature |
| Cure Time | 24 hr |
| Dispenser | No |
| Environmental Considerations | GREENGUARD® Certified, Low VOC, SCAQMD |
| Features | Permanent Adhesive |
| Flame Retardant | No |
| Hazardous Material Warning | Please note the warnings on the packaging |
| Heat Resistance Temperature (Celsius) | <110 °C |
| Heat Resistance Temperature (Fahrenheit) | <230 °F |
| Industries | General Industrial |
| Physical Form | Thin liquid |
| Product Color | Red, Transparent |
| Product Form | Bulk |
| Product Type | Adhesive |
| Shelf Life | 21 Month |
| Smallest Saleable Unit | Drum |
| Solids Weight Percent (Approximate) | 34 % |
| Spray Pattern | Pebble, Lace |
| Surface Type | Laminate, Metal, Wood Veneer, Wood |
| Units per Case | 1.0 |
Safety Data Sheets
Document Number: MSDS_2216398_US_EN
(PDF)
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
