3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 Black is a toughened two-part, room-temperature curing acrylic adhesive specially formulated to bond oily metals, plastics, and other surfaces. With lower odor and non-flammable properties, 3M™ Scotch-Weld™ Acrylic Adhesive DP810 Black contributes to a safer work environment compared to typical acrylic adhesives.
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Provides High Shear and Peel Strength and is Toughened for Impact Resistance
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet demanding end-use applications. Making work safer, faster, and more efficient, that's just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 Black. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The acrylic adhesive cures to a tan or black color.
Recommended Applications
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 Black provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 Black is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.
| Adhesion Strength (Imperial) | 480 oz/in |
| Adhesive Type | Acrylic |
| Application | Impact Resistance |
| Brands | Scotch-Weld™ |
| Container Size (Imperial) | 1 gal, 1.64 gal, 5.28 fl oz, 6.76 fl oz |
| Container Size (Metric) | 3.78 L, 20 L, 48.5 mL, 200 mL |
| Full Cure Time | 8 hr - 24 hr |
| Industries | Construction, Consumer Goods, Electronics, Metalworking, General Industrial, Military & Government, Specialty Vehicle, Transportation, Signage, Woodworking |
| Open Time | 10 min @ 72 °F (22 °C) |
| Performance Level | Best |
| Physical Form | Flowable Liquid |
| Product Form | Each |
| Set Time | 10 min |
| Shear Strength | 3600 psi |
| Smallest Saleable Unit | Canister, Drum, Each |
| Specific Gravity | 1.07 |
| Storage Temperature (Celsius) | 0°C, 4 °C |
| Storage Temperature (Fahrenheit) | 32 °F, <=40 Degree Fahrenheit |
| Surface Type | Oily, Smooth |
| Units per Case | 1.0, 4.0, 12.0 |
| Volume (Imperial) | 1 gal, 1.71 gal, 5.3 fl oz, 6.76 fl oz |
| Volume (Metric) | 3.8 L, 20 L, 48.5 mL, 200 mL |
| Work Life | 10 min |
Safety Data Sheets
Document Number: MSDS_1608561_US_EN
(PDF)
Safety Data Sheets
Document Number: MSDS_1608546_US_EN
(PDF)
Safety Data Sheets
Document Number: MSDS_1608538_US_EN
(PDF)
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
