3M™ Cold Shrink QT-III Termination Kits 7673 S Series
- | Select product options for IDs.
Questions? Ready to get started?
For questions or technical help, please contact us by phone at: 1-800-245-3573 or submit an inquiry.
Details
Highlights
- High dielectric-constant material regulates the distribution of electric field stress
- Requires no specialised tools or flame
- Silicone rubber insulation offers durability and helps reduce leakage currents in damp conditions
- Lightweight for safer and easier installation
- Meets requirements of IEEE Standard 48 Class 1 for outdoor, weather-exposed applications
3M™ Cold Shrink QT III 7673 S Termination Kit includes a 1 piece, skirted termination. It ensures a pliable, tight seal for jacketed concentric neutral and concentric neutral power cables.
For areas with higher contamination, 3M™ Cold Shrink QT III 7673 S Series termination kits provide additional skirts and water blocking materials to give you a longer creepage path. The complete termination is made up of 4 sub assemblies: the Silicone Rubber Skirted Stress Control Assembly, Hi K Stress Control Adapter Assembly, Silicone Rubber Lug Seal Assembly and Silicone Rubber Ground Seal Assembly. Following installation, the support cores can be recycled. When the job requires a cold shrink delivery system, you need the 7673 S Series 3M Cold Shrink QT III Termination Kit.
Typical properties
Resources
Similar products
| Voltage | 69 kV - 72.5 kV, 325 kV, 69 kV, 350 kV, 72.5 kV | |
| Conductor Sizes (Imperial) | 350 kcmil, 400 kcmil, 500 kcmil, 600 kcmil, 900 kcmil, 1000 kcmil, 1250 kcmil, 1500 kcmil, 800 kcmil, 700 kcmil, 750 kcmil | |
| Number of Conductors | 1 | |
| Breakout Boot | No | |
| Cable Shielding | Jacketed Concentric Neutral (JCN), Concentric Neutral (CN), Tape Over Wire, Longitudinally Corrugated (LC), Wire-Over-Tape Shield | |
| Number of Skirts | 1 , 8 |
3M™ Cold Shrink QT-III Termination Kits 7673 S Series 
3M™ Cold Shrink QT-III High Fault Current Termination Kit 7650-S-HSG & 7660-HSG SeriesLegal disclaimer
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
