3M™ 5500 Series Molded Rubber QS II Splice Kit is an inline splice designed to use on 15kV tape shield, wire shield, or UniShield® cables with copper or aluminum conductors. Its peroxide cured EPDM rubber construction ensures a long life. The continuous current rating of each splice is the same as the current rating of the cable that it is sized to accommodate.
3M™ 5500 Series Molded Rubber QS II Splice Kit includes 2 Cold Shrink™ end seals, 2 silicone grease tubes, 2 shielding tape 24 strips, a shield clamp, mastic sealing strip, shield continuity assembly, semi con tape 13 roll, vinyl tape 35 roll, solvent saturated cleaning pad, plastic glove and an instruction sheet. The kit meets the requirements of IEEE 404 standards.
Cable Shielding | Concentric Neutral (CN), Tape Shield, UniShield®, Wire Shield |
Case Quantity | 1 |
Conductor Material | Aluminum, Copper |
Connector Included | 20006, CI-1/0, CI-2/0, CI-21, CI-4/0, None |
Insulation O.D. Range | 0.637 - 0.900 Inch, 0.84 - 1.05 Inch |
Insulation Outer Diameter (Imperial) | 0.63 in, 0.64 in, 0.65 in, 0.66 in, 0.67 in, 0.68 in, 0.69 in, 0.7 in, 0.71 in, 0.72 in, 0.73 in, 0.74 in, 0.75 in, 0.76 in, 0.77 in, 0.78 in, 0.79 in, 0.8 in, 0.81 in, 0.82 in, 0.83 in, 0.84 in, 0.85 in, 0.86 in, 0.87 in, 0.88 in, 0.89 in, 0.9 in, 0.91 in, 0.92 in, 0.93 in, 0.94 in, 0.95 in, 0.96 in, 0.97 in, 0.98 in, 0.99 in, 1 in, 1.01 in, 1.02 in, 1.03 in, 1.04 in, 1.05 in |
Insulation Outer Diameter (Metric) | 16 mm, 16.256 mm, 16.51 mm, 16.764 mm, 17.018 mm, 17.272 mm, 17.526 mm, 17.78 mm, 18.034 mm, 18.288 mm, 18.542 mm, 18.796 mm, 19.05 mm, 19.304 mm, 19.558 mm, 19.812 mm, 20.066 mm, 20.32 mm, 20.574 mm, 20.828 mm, 21.082 mm, 21.336 mm, 21.59 mm, 21.844 mm, 22.098 mm, 22.352 mm, 22.606 mm, 22.86 mm, 23.114 mm, 23.368 mm, 23.622 mm, 23.876 mm, 24.13 mm, 24.384 mm, 24.638 mm, 24.892 mm, 25.146 mm, 25.4 mm, 25.654 mm, 25.908 mm, 26.162 mm, 26.416 mm, 26.67 mm |
Insulation Outside Diameter Range | 0.637 - 0.900 Inch, 0.84 - 1.05 Inch |
Insulation Outside Diameter Range (Metric) | 16.2 - 22.9 mm, 21.3 - 26.7 mm |
Maximum Conductor Size (Imperial) | 1 AWG (Stranded), 1/0 AWG (Stranded), 2 AWG (Stranded), 2/0 AWG (Stranded), 250 kcmil (Stranded), 3/0 AWG (Stranded), 4 AWG (Stranded), 4/0 AWG (Stranded) |
Maximum Conductor Size (Metric) | 120 mm² (Stranded), 25 mm² (Stranded), 35 mm² (Stranded), 50 mm² (Solid), 50 mm² (Stranded), 70 mm² (Stranded), 95 mm² (Stranded) |
Minimum Conductor Size (Imperial) | 2 AWG (Stranded) |
Minimum Conductor Size (Metric) | 35 mm² (Stranded) |
Number of Conductors | 1 |
Operating Voltage | 15 kV |
Product Series | 5500 Series |
Product Type | Inline |
Splice Type | Inline |
Voltage | 25/28 kV |
Safety Data Sheets
Document Number: MSDS_2679322_US_EN
(PDF , 0B)
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.