3M™ Motor Lead Pigtail Splice Kits 5321-5324
- | Select product options for IDs.
Typical properties
| Cable Shielding | Non-shielded |
| Cable Type | Polymeric insulated cables |
| Connection Type | Pigtail (Shielded), Pigtail (Non-shielded) |
| Indoor/Outdoor | Indoor |
| Insulation Outside Diameter | 0.53-0.88 Inch, 0.30-0.51 Inch, 0.43-0.65 Inch, 0.75-1.12 Inch |
| Insulation Outside Diameter Range | 0.53-0.88 in, 0.75-1.12 in, 0.30-0.51 in, 0.43-0.65 in |
| Insulation Outside Diameter Range (Metric) | 13.5-22.4 mm, 1.90 - 28.4 mm, 7.6-13.0 mm, 10.9 - 16.5 mm |
| Lug Cover Length | 7-8 in, 8-9 in, 9-10 in, 10.5-11.5 in |
| Lug Cover Length (Metric) | 228.6-254.0 mm, 266.7-292.1 mm, 177.8-203.2 mm, 203.2-228.6 mm |
| Lug/Stem Connector Included in Kit | No |
| Maximum Bolt Length | 1/2 in, 3/4 in, 1-1/2 in, 1-1/4 in |
| Maximum Bolt Length (Metric) | 12.7 mm, 19.1 mm, 31.8 mm, 38.1 mm |
| Maximum Conductor Size (Imperial) | 500 kcmil |
| Maximum Conductor Size (Metric) | 240 mm² |
| Maximum Feeder Lead Size | 4 AWG, 1/0 AWG, 250 kcmil, 500 kcmil |
| Maximum Motor Lead Size | 4 AWG, 1/0 AWG, 250 kcmil, 500 kcmil |
| Maximum Operating Voltage | 8 kV |
| Minimum Conductor Size (Imperial) | 4/0 AWG |
| Minimum Conductor Size (Metric) | 95 mm² |
| Number of Conductors | 1 |
| Number of Skirts | 0 |
| Range Feeder Cable (AWG & kcmil) | 8-4, 2-1/0, 1/0-250, 250-500 |
| Splice Type | Pigtail Only |
| Units per Case | 1.0 |
| Voltage | 5 kV - 8 kV, 5/8 kV |
Resources
Safety Data Sheets
Document Number: MSDS_2648962_US_EN
(PDF)
Safety Data Sheets
Document Number: MSDS_2649002_US_EN
(PDF)
Safety Data Sheets
Document Number: MSDS_2649036_US_EN
(PDF)
Safety Data Sheets
Document Number: MSDS_2649119_US_EN
(PDF)
Similar products
| Maximum Operating Voltage | 8 kV | |||
| Cable Shielding | Non-shielded | |||
| Splice Type | Pigtail Only | |||
| Maximum Motor Lead Size | 4 AWG, 1/0 AWG, 250 kcmil, 500 kcmil | |||
| Maximum Feeder Lead Size | 4 AWG, 1/0 AWG, 250 kcmil, 500 kcmil |
3M™ Motor Lead Pigtail Splice Kits 5321-5324
3M™ Motor Lead Inline Splice Kits, Non-Shielded and Shielded Cables, 5331- 5334
3M™ Motor Lead Inline Splice Kits 5311–5314Legal disclaimer
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
