3M™ Scotchcast™ Electrical Resin 3 (10 lb), 1 Kits/Case
- 3M ID 7100116190
- UPC 00054007344995
Details
Highlights
- 80 Shore D hardness
- Has 21 minute gel time at 121 °C (250 °F)
- Suitable for impregnating, potting and encapsulating applications such as coils, transformers and modules
- Withstands a temperature range of 0 to 130 °C (32 to 266 °F)
- Elongates 2% longer than its original size for easy insulation or wrapping
- Low-viscosity and fine-wetting properties allow complete impregnation of fine wires in coils
- RoHS Compliant
3M™ Scotchcast™ Electrical Resin 3 is a 2 part, oven curing, unfilled, rigid, epoxy based, liquid resin. The resin is characterized by an outstanding physical and electrical stability. It is highly resistant to moisture and is suitable for impregnating, potting and encapsulating applications such as coils, transformers, modules and other electrical as well as electronic components.
3M™ Scotchcast™ Electrical Resin 3 has low viscosity and fine wetting properties that assure complete impregnation of fine wires in coils. RoHS Compliant.
Typical properties
| Base Polymer | Epoxy |
| Brands | Scotchcast™ |
| Cure Method | Oven |
| Cure Temperature | >75 Degree Celsius |
| Dielectric Strength (V/mil) | 300 V/mil |
| Elongation | 2 % |
| Flammability Rating | Not Self Extinguishing |
| Flexibility | Rigid |
| Gel Time | 22 min @ 250 °F (121 °C) |
| Hardness | 80 Shore D |
| Material | Epoxy |
| Mix Ratio | Wt 2:3 Vol (%) 37:63 |
| Mixed Viscosity | Low (<10,000 cpi) |
| Product Color | Clear Amber |
| Product Type | Electrical Resin |
| Resin Cure | Oven Cure Unfilled Resins |
| Resin Matrix | Unfilled |
| Temperature Rating | Class B (<=130 deg C) |
| Tensile Strength (Imperial) | 4400 Pound-Force Per Square Inch |
| Thermal Conductivity | Low (<0.25 W/m-K) |
Resources
Safety Data Sheets
Document Number: MSDS_2609139_US_EN
(PDF)
Connect with us. We’re here to help.
Thank You
Your form was submitted successfully!
Our Apologies...
An error has occurred while submitting. Please try again later...
Similar products
| Base Polymer | Epoxy | |
| Brands | Scotchcast™ | |
| Cure Method | Oven | |
| Cure Temperature | >75 Degree Celsius | |
| Dielectric Strength (V/mil) | 300 V/mil | |
| Elongation | 2 % | |
| Flammability Rating | Not Self Extinguishing | |
| Flexibility | Rigid | |
| Gel Time | 22 min @ 250 °F (121 °C) | |
| Hardness | 80 Shore D | |
| Material | Epoxy | |
| Mix Ratio | Wt 2:3 Vol (%) 37:63 | |
| Mixed Viscosity | Low (<10,000 cpi) | |
| Product Color | Clear Amber | |
| Product Type | Electrical Resin | |
| Resin Cure | Oven Cure Unfilled Resins | |
| Resin Matrix | Unfilled | |
| Temperature Rating | Class B (<=130 deg C) | |
| Tensile Strength (Imperial) | 4400 Pound-Force Per Square Inch | |
| Thermal Conductivity | Low (<0.25 W/m-K) |
3M™ Scotchcast™ Electrical Resin 3 (10 lb), 1 Kits/CaseLegal disclaimer
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
