Contact a Sales Rep
Thank You!
Your form was submitted successfully.
Our Apologies...
An error has occurred while submitting. Please try again later...
3M™ Scotchlok™ Non-Insulated Butted Seam Flag Female Disconnects
- | Select product options for IDs.
Details
Highlights
- Non-insulated, butted-seam barrel with a beveled mouth offers easy insertion of wires
- Dents and rolled edges of this female disconnect flag terminal offer excellent holding force
- Allows for quick and easy disconnect of wires
- Made of durable brass for good conductivity and has corrosion-resistant tin plating
- Withstands a maximum temperature of 347 degrees F (175 degrees C) for bare terminals
- Rated 600V for building wire and 1000V for signs, fixtures or luminaires
- UL Listed, CSA Certified and RoHS 2011/65/EU Compliant
3M™ Scotchlok™ Female Flag Disconnect Terminal has dents and rolled edges to offer superior holding force while allowing for quick and easy disconnect. The terminal has a non-insulated, butted-seam barrel and withstands a maximum temperature of 347 degrees F (175 degrees C). Its durable brass construction offers good conductivity and a tin-plated finish resists corrosion.
3M™ Scotchlok™ Female Flag Disconnect Terminal attaches to the mating part with a tongue that slips over the male tab. The terminal has a non-insulated, butted-seam barrel and a beveled mouth to easily guide the wire into position. UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.
Typical properties
| Barrel Inside Diameter | >0 Inch, 0.075 Inch, 0.095 Inch, 0.095 Inch (2.41 mm) |
| Barrel Length (Imperial) | >=0 Inch, 0.20 Inch, 0.25 Inch, 0.26 Inch |
| Barrel Style | Butted |
| Bullet Diameter | 0.156 |
| CSA File Number | LR22190 |
| Connection Width (Imperial) | 0.187 in, 0.25 in |
| Connection Width (Metric) | 4.75 mm, 6.35 mm |
| Disconnect Type | Female |
| Fastener Orientation | Female |
| Insulation Color | Blue |
| Insulation Material | Non-insulated |
| Material | Plastic |
| Mates with Female Width | >0 Inch, 0.187 Inch, 0.250 Inch |
| Mates with Male Tab Width (W') | >0 Inch, 0.187 Inch, 0.250 Inch |
| Maximum Conductor Size (Imperial) | 14 AWG, 18 AWG |
| Maximum Conductor Size (Metric) | 1 mm², 2.5 mm² |
| Maximum Insulation Outer Diameter (Imperial) | 0.25 in |
| Maximum Insulation Outer Diameter (Metric) | 3.7 mm |
| Maximum Insulation Outside Diameter | 0.145 in |
| Maximum Operating Temperature (Celsius) | 175 ℃ |
| Maximum Operating Temperature (Fahrenheit) | 347 ℉ |
| Maximum Recommended Voltage Rating | 600 V |
| Maximum Voltage Rating | 600 to 1000 V |
| Minimum Conductor Size (Imperial) | 16 AWG, 22 AWG |
| Minimum Conductor Size (Metric) | .34 mm², 1.5 mm² |
| Pad Width | 0.187 in, 0.25 in |
| Product Color | Blue |
| Product Type | Connector |
| Solution for | Wireless Network: Infrastructure Accessories |
| Tab Width | 0.110, 0.187, 0.250 |
| Terminal Style | Flag |
| Terminal Type | Disconnect |
| UL File Number | E70512 |
| Units per Case | 500.0, 1000.0 |
| Overall Length (Imperial) | 0.46 in, 0.47 in, 0.5 in, 0.51 in |
| Overall Length (Metric) | 11.93 mm |
Resources
Regulatory Data Sheet
Document Number: MSDS_3724580_US_EN_RDS
(PDF)
Similar products
| Connection Width (Metric) | 4.75 mm, 6.35 mm | |||
| Connection Width (Imperial) | 0.187 in, 0.25 in | |||
| Maximum Conductor Size (Imperial) | 14 AWG, 18 AWG | |||
| Maximum Conductor Size (Metric) | 1 mm², 2.5 mm² | |||
| Minimum Conductor Size (Metric) | .34 mm², 1.5 mm² | |||
| Minimum Conductor Size (Imperial) | 16 AWG, 22 AWG |
3M™ Scotchlok™ Non-Insulated Butted Seam Flag Female Disconnects
3M™ Scotchlok™ Non-Insulated Interlock Barrel Female Disconnects
3M™ Scotchlok™ Non-Insulated Butted Seam Male Disconnects
3M™ Scotchlok™ Non-Insulated Butted Seam Pin TerminalsLegal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
