3M™ Scotchlok™ Non-Insulated Brazed Seam Butt Connectors
- | Select product options for IDs.
Details
Highlights
- Non-insulated, brazed-seam barrel ensures a secure fit and offers reliable performance
- Beveled mouth offers easy insertion of wires
- Built-in wire stop for correct positioning
- Made of electrolytic copper for good conductivity and has tin plating for corrosion resistance
- Withstands a maximum temperature of 347 degrees F (175 degrees C) for bare terminals
- 600V-rated for building wire and 1000V for signs, fixtures or luminaires
3M™ Scotchlok™ Non-Insulated Brazed Seam Butt Connector ensures an ideal fit while offering reliable and safe performance. The non-insulated, brazed-seam barrel with a beveled mouth that guides the wire into position and withstands a maximum temperature of 347 degrees F (175 degrees C). Electrolytic copper construction offers good conductivity and a tin-plated finish resists corrosion.
3M™ Scotchlok™ Non-Insulated Brazed Seam Butt Connector has a non-insulated, silver brazed-seam barrel with a beveled mouth that guides the wire into position and withstands crimping pressures or operating stresses. UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.
Typical properties
Resources
Similar products
| Maximum Conductor Size (Imperial) | 16 AWG, 4 AWG, 6 AWG, 10 AWG, 18 AWG, 8 AWG | |||
| Maximum Conductor Size (Metric) | 1.5 mm², 25 mm², 16 mm², 6 mm², 1 mm², 10 mm² | |||
| Minimum Conductor Size (Metric) | 2.5 mm², 25 mm², 16 mm², 4 mm², .34 mm², 10 mm² | |||
| Minimum Conductor Size (Imperial) | 14 AWG, 4 AWG, 6 AWG, 12 AWG, 22 AWG, 8 AWG | |||
| Terminal Type | Butt Connectors |
3M™ Scotchlok™ Non-Insulated Brazed Seam Butt Connectors
3M™ Scotchlok™ Non-Insulated Interlock Barrel Female Disconnects
3M™ Scotchlok™ Non-Insulated Butted Seam Male Disconnects
3M™ Scotchlok™ Non-Insulated Butted Seam Pin TerminalsLegal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
