Contact a Sales Rep
Thank You!
Your form was submitted successfully.
Our Apologies...
An error has occurred while submitting. Please try again later...
3M™ Scotchlok™ Heat Shrink Nylon Fully Insulated Butted Seam Male Disconnects
- | Select product options for IDs.
Details
Highlights
- This male disconnect terminal offers excellent holding force
- When crimped and shrunk, pre-insulated adhesive-lined polyolefin offers seal resistance to water and salt
- Mates with 0.25-in wide female tab
- Made of electrolytic copper for good conductivity and has corrosion-resistant tin plating
- Withstands a maximum temperature of 221 degrees F (105 degrees C)
- Rated 600V for building wire and 1000V for signs, fixtures or luminaires
- UL Listed, CSA Certified and RoHS 2011/65/EU Compliant
3M™ Scotchlok™ Color-Coded Heat Shrink Male Disconnect Terminal allows for quick and easy disconnect. The butted-seam barrel is covered by an adhesive-lined polyolefin tubing to offer moisture-seal protection. It withstands a maximum temperature of 221 degrees F (105 degrees C). Its electrolytic copper construction offers good conductivity and a tin-plated finish resists corrosion.
3M™ Scotchlok™ Color-Coded Heat Shrink Male Disconnect Terminal attaches to the mating part with a tongue that slips over the female tab. This versatile terminal has a butted-seam barrel that is covered by a see-through, pre-insulated transparent tubing. The tubing provides seal resistance to water, salt and other contaminants when crimped and shrunk. The heat shrink tubing offers better pullout strength and strain relief when shrunk. UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.
Typical properties
| Barrel Inside Diameter | 0.065 Inch, 0.085 Inch, 0.15 Inch, 0.150 Inch |
| Barrel Length (Imperial) | 0.25 Inch |
| Barrel Style | Butted |
| Bullet Diameter | 0.156 |
| Connection Width (Imperial) | 0.25 in |
| Connection Width (Metric) | 6.35 mm |
| Diameter (D) | 0.3 Inch, 0.30 Inch, 0.39 Inch |
| Disconnect Type | Male |
| Fastener Orientation | Male |
| Insulation Color | Yellow, Red, Blue |
| Insulation Material | Heat Shrink |
| Male Tab Width (W') | 0.250 Inch, 0.25 Inch |
| Material | Plastic |
| Maximum Conductor Size (Imperial) | 10 AWG, 14 AWG, 18 AWG |
| Maximum Conductor Size (Metric) | 1 mm², 2.5 mm², 6 mm² |
| Maximum Insulation Outer Diameter (Imperial) | 0.145 in |
| Maximum Insulation Outer Diameter (Metric) | 3.7 mm |
| Maximum Operating Temperature (Celsius) | 105 ℃ |
| Maximum Operating Temperature (Fahrenheit) | 221 ℉ |
| Maximum Recommended Voltage Rating | 600 V |
| Minimum Conductor Size (Imperial) | 12 AWG, 16 AWG, 22 AWG |
| Minimum Conductor Size (Metric) | .34 mm², 1.5 mm², 4 mm² |
| Pad Width | 0.25 in |
| Product Color | Yellow, Red, Blue |
| Tab Width | 0.110, 0.187, 0.250 |
| Terminal Style | Fully Insulated |
| Terminal Type | Disconnect |
| Units per Case | 125.0, 250.0 |
| Voltage Application | Low Voltage |
| Overall Diameter (Imperial) | 0.3 in, 0.39 in |
| Overall Length (Imperial) | 1.2 in |
| Overall Length (Metric) | 30.48 mm |
| Overall Width (Imperial) | 0.44 in, 0.47 in |
| Overall Width (Metric) | 11.17 mm, 11.93 mm |
Resources
Regulatory Data Sheet
Document Number: MSDS_3691706_US_EN_RDS
(PDF)
Similar products
| Connection Width (Metric) | 6.35 mm | |||
| Maximum Conductor Size (Imperial) | 10 AWG, 14 AWG, 18 AWG | |||
| Maximum Conductor Size (Metric) | 1 mm², 2.5 mm², 6 mm² | |||
| Minimum Conductor Size (Metric) | .34 mm², 1.5 mm², 4 mm² | |||
| Minimum Conductor Size (Imperial) | 12 AWG, 16 AWG, 22 AWG | |||
| Maximum Insulation Outer Diameter (Metric) | 3.7 mm |
3M™ Scotchlok™ Heat Shrink Nylon Fully Insulated Butted Seam Male Disconnects
3M™ Scotchlok™ Nylon Fully Insulated Interlock Barrel Female Disconnects
3M™ Scotchlok™ Nylon Fully Insulated with Insulation Grip Interlock Barrel Female Disconnects
3M™ Scotchlok™ Nylon Fully Insulated with Insulation Grip Male DisconnectsLegal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
