3M™ Sheath Seal Kits 5831 and 5832
- | Select product options for IDs.
Details
Highlights
- 3M Sheath Seal Kit, sheath seal kit, sheath seal kit 5831, sheath seal kit 5832, flame-retardant sheath seal kit, 3 conductor resin kit, multi-conductor sheath seal kit, copper or aluminum cable, shielded and non-shielded cable
- Seals the sheath area for multi-conductor cables
- Offers a single seal
- Seals copper or aluminum cables, shielded and non-shielded
- Flame-retardant compound 2131 replaces the cable jacket when splicing
- RoHS 2011/65/EU Compliant
3M™ Sheath Seal Kit is used to seal the sheath area for multi conductor cables with or without ground wires. This kit includes 1 wraparound mold body, 2 bags 3M™ Scotchcast™ Flame-Retardant Compound 2131, 1 3M Three M Ite™ Elek Tro Cut™ Abrasive Cloth, 1 roll Scotch® Super 33+™ Vinyl Electrical Tape, 2 rolls Scotch® Linerless Rubber Splicing Tape 130C and 3M Scotchfil™ Electrical Insulation Putty.
3M™ Sheath Seal Kit is capable of offering a single seal. This kit works with copper or aluminium cables. A flame retardant compound is included in this kit that helps to replace the cable jacket when splicing or repairing mine and portable cables. RoHS 2011/65/EU Compliant.
Typical properties
| Cable Outside Diameter Range | 0.25-0.80 inch |
| Conductor Sizes (Imperial) | 2-3/0 AWG, 4/0 AWG-500 kcmil |
| Inner Diameter Before Shrink (Imperial) | 2.6 in, 3.75 in |
| Inner Diameter Before Shrink (Metric) | 66 mm, 95.3 mm |
| Maximum Conductor Size (Imperial) | 3/0 AWG, 500 kcmil |
| Maximum Conductor Size (Metric) | 95 mm², 240 mm² |
| Maximum Jacket Or Armor Outside Diameter | 2.6 in, 3.75 in |
| Minimum Conductor Size (Imperial) | 2 AWG, 4/0 AWG |
| Minimum Conductor Size (Metric) | 35 mm², 120 mm² |
| Units per Case | 1.0 |
Resources
Safety Data Sheets
Document Number: MSDS_2978278_US_EN
(PDF)
Similar products
| Inner Diameter Before Shrink (Metric) | 66 mm, 95.3 mm | ||
| Inner Diameter Before Shrink (Imperial) | 2.6 in, 3.75 in |
3M™ Sheath Seal Kits 5831 and 5832
3M™ Scotchcast™ Sheath Seal Kits
3M™ Scotchcast™ M-Series Cable Repair KitsLegal disclaimer
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
