Contact a Sales Rep
Thank You!
Your form was submitted successfully.
Our Apologies...
An error has occurred while submitting. Please try again later...
3M™ Thin-Wall Heat Shrink Tubing EPS-300
- | Select product options for IDs.
Details
Highlights
- Dual-wall construction provides abrasion resistance and moisture-seal protection
- Offers the advantage of integral, adhesive-lined construction
- Offers protection for automotive, truck, electronic components, wire splices, wire bundles and harness breakouts
- Made of black flexible polyolefin
- Withstands temperatures of -67 to 230 degrees F (-55 to 110 degrees C)
- Flame-retardant tubing is rated for 600V applications
3M™ Heat Shrink Tubing EPS-300 is a dual wall tubing provides the advantage of an integral, adhesive lined construction. This flame retardant tubing with a 3:1 shrink ratio offers insulation for 600V rated applications. The flexible polyolefin construction features an internal layer of thermoplastic adhesive, which offers moisture seal protection in automotive and marine applications.
3M™ Heat Shrink Tubing EPS-300 is color coded for quick and easy identification of the wire. It provides a skintight fit and strain relief protection for electronic components, wire splices, wire bundles and harness breakouts. This flame retardant tubing has a heat shrinkable outer wall that is irradiation cross linked for abrasion resistance and helps to maintain the high flow as well as good adhesion characteristics. When the tubing cools down, it forms a permanent, water resistant barrier. It withstands a wide temperature range of 67 to 230 degrees F ( 55 to 110 degrees C). UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.
Typical properties
| Adhesion Strength (Imperial) | 40 Ounce |
| Adhesion to Steel oz/in (N/100 mm) | 40 (44) |
| Adhesive Material | Silicone |
| Application Specifications | ABS |
| Dielectric Strength (V/mil) | 500 V/mil |
| Electrolytic Corrosion Factor | 0.9 |
| Elongation | 450 %, 450 Decibel |
| Expanded Inner Diameter | 0.125 in, 0.187 in, 0.25 in, 0.3 in, 0.375 in, 0.5 in, 0.75 in, 1 in, 1.5 in |
| Expanded Inner Diameter (Metric) | 3.2 mm, 4.8 mm, 6.4 mm, 7.62 mm, 9.5 mm, 12.70 mm, 19.1 mm, 25.40 mm, 38.10 mm, 38.1 mm |
| Flame Retardant | Yes |
| Flammability Rating | UL 224 All Tubing Flame Test [jacket], UL 224 All Tubing Flame Test |
| Heat Shrink Type | Adhesive-Lined Polyolefin Heat Shrink Tubing |
| Inner Diameter After Shrink (Imperial) | 0.04 in, 0.062 in, 0.063 in, 0.12 in, 0.125 in, 0.15 in, 0.16 in, 0.25 in, 0.32 in, 0.5 in, 0.51 in |
| Inner Diameter After Shrink (Metric) | 1.02 mm, 1.57 mm, 1.6 mm, 3.05 mm, 3.18 mm, 3.81 mm, 4.06 mm, 6.35 mm, 8.13 mm, 12.7 mm, 12.95 mm |
| Inner Diameter Before Shrink (Imperial) | 0.125 in, 0.187 in, 0.25 in, 0.3 in, 0.375 in, 0.5 in, 0.75 in, 1 in, 1.5 in |
| Inner Diameter Before Shrink (Metric) | 3.18 mm, 4.75 mm, 4.8 mm, 6.35 mm, 7.62 mm, 9.53 mm, 12.7 mm, 19.05 mm, 25.4 mm, 38.1 mm |
| Lubricant Type | Gel |
| Material | Polyolefin |
| Maximum Operating Temperature (Celsius) | 110 ℃, 150 ℃, 200 ℃ |
| Maximum Operating Temperature (Fahrenheit) | 230 ℉, 300 ℉, 392 ℉ |
| Minimum Expanded Tubing I. D. | 0.125 in, 0.187 in, 0.25 in, 0.3 in, 0.375 in, 0.5 in, 0.75 in, 1 in, 1.5 in |
| Non-Corrosive | Yes |
| Operating Temperature (Celsius) | -55 °C to 110 °C |
| Operating Temperature (Fahrenheit) | -67 °F to 230 °F |
| Operating Temperature Range (Celsius) | -55 °C to 110 °C, -55 °C to +175 °C |
| Operating Temperature Range (Fahrenheit) | -67 °F to 230 °F, -67 °F to 347 °F |
| Product Color | Transparent, Red, Black |
| Recovered Inner Diameter | 0.04 in, 0.063 in, 0.08 in, 0.12 in, 0.15 in, 0.16 in, 0.25 in, 0.32 in, 0.4 in, 0.5 in |
| Recovered Inner Diameter (Metric) | 1 mm, 1.02 mm, 1.6 mm, 2 mm, 3.1 mm, 3.81 mm, 4.1 mm, 6.4 mm, 8.1 mm, 13 mm |
| Shrink Ratio | 3:1 |
| Solution for | Wireless Network: Infrastructure Accessories, Access Network: xDSL, Access Network: FTTH/FTTB/CATV, Long-haul/Metro Loop Network: CO/POP, Wireless Network: Backhaul, Long-haul/Metro Loop Network: Outdoor |
| Tensile Strength (Imperial) | 2100 Pound-Force Per Square Inch |
| Tubing Type | Dual Wall (Adhesive Lined) |
| UL File Number | E-157227 |
| Units per Box | 10 |
| Units per Case | 3.0, 5.0, 10.0, 12.0, 24.0, 25.0, 42.0, 45.0, 75.0, 125.0, 200.0, 250.0 |
| Overall Length (Imperial) | 4 in, 6 in, 48 ft |
| Overall Length (Metric) | 152 mm, 1219 mm |
Resources
Regulatory Data Sheet
Document Number: MSDS_2656692_US_EN_RDS
(PDF)
Similar products
| Inner Diameter After Shrink (Metric) | 1.02 mm, 1.57 mm, 1.6 mm, 3.05 mm, 3.18 mm, 3.81 mm, 4.06 mm, 6.35 mm, 8.13 mm, 12.7 mm, 12.95 mm | |||
| Maximum Operating Temperature (Fahrenheit) | 230 ℉, 300 ℉, 392 ℉ | |||
| Inner Diameter Before Shrink (Metric) | 3.18 mm, 4.75 mm, 4.8 mm, 6.35 mm, 7.62 mm, 9.53 mm, 12.7 mm, 19.05 mm, 25.4 mm, 38.1 mm | |||
| Maximum Operating Temperature (Celsius) | 110 ℃, 150 ℃, 200 ℃ | |||
| Inner Diameter After Shrink (Imperial) | 0.04 in, 0.062 in, 0.063 in, 0.12 in, 0.125 in, 0.15 in, 0.16 in, 0.25 in, 0.32 in, 0.5 in, 0.51 in | |||
| Inner Diameter Before Shrink (Imperial) | 0.125 in, 0.187 in, 0.25 in, 0.3 in, 0.375 in, 0.5 in, 0.75 in, 1 in, 1.5 in |
3M™ Thin-Wall Heat Shrink Tubing EPS-300
3M™ Heat Shrinkable Splice Jacket Kit HSJ 
3M™ Heat Shrink Tubing HDCW
3M™ Heat Shrink Thin-Wall Flexible Polyolefin Tubing FP-301 Legal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
