3M™ Cushion-Mount™ Pro Plate Mounting Tape with Comply™ Adhesive System 21320 Yellow
- | Select product options for IDs.
Details
Highlights
- 0.020 inch (0.51 mm) double coated medium soft density yellow foam tape
- Securely bonds flexographic plate to sleeve or cylinder to prevent plate edge lift during printing
- Up to 78% easier to remove plate from tape*; up to 54% easier to remove tape from sleeve**
- Designed to be easily removed from ink-contaminated print plates
- Ideal for printing combinations of solids and process with halftone dots
- Virtually no air bubbles under the plate or tape due to the air release feature designed into the tape
- Grooves in the adhesive are created by a crosshatch pattern from the release liner
- Yellow foam color indicates the medium soft density foam
- Plate demounts from the tape without adhesive residue to help reduce plate damage and increase efficiency
- Allows clean, one-piece tape removal without scoring or damaging the print sleeve
3M™ Cushion-Mount™ Pro Plate Mounting Tape with Comply™ Adhesive System 21320 Yellow is designed for mounting flexographic photopolymer print plates to print sleeves or steel cylinders. It features the Comply™ Adhesive System, which has the air release feature designed into the tape. This plate-mounting sticky-back yellow foam tape provides high-quality medium soft print.
The crosshatch pattern in the adhesive layers releases air so there are virtually no bubbles that require remounting
3M™ Cushion-Mount™ Pro Plate Mounting Tape with Comply™ Adhesive System 21320 Yellow is a yellow foam tape that provides high quality medium soft combination print. It has the air release feature designed into the tape to allow for bubble-free mounting and predictable, repeatable print results. This flexographic plate mounting tape is tolerant of ink contaminants and has a dependable adhesive that resists lifting on press yet removes cleanly from the print plate and the cylinder or sleeve. It is up to 78% easier to remove the flexographic photopolymer plate from this tape* and up to 54% easier to remove the tape from a sleeve** to help keep print operations productive
*Compared to 3M™ Cushion‐Mount™ Plus H‐Series Plate Mounting Tapes
** Compared to 3M™ Cushion‐Mount™ Plus E‐, H‐ and L‐Series Plate Mounting Tapes
Recommended Applications
- Flexographic printing, flexographic printers
- Mounting photopolymer plates to flexographic printing cylinders and sleeves
- Used in combination, process and solid printing processes
- 3M sticky back tapes are designed for wide-web presses to print film or paper for flexible packaging industry
3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high-speed print runs.
This cushion tape is manufactured for 20 mil applications. It is constructed with differential acrylate adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting photopolymer plates. The adhesive on the non-linered (sleeve / cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting.
On Easy with Reduced Air Entrapment
The 3M™ Comply™ Adhesive System features a crosshatch pattern of unique micro-channels that allow air to escape more easily than from mounting tapes using a pebbled or flat adhesive surface. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting.
Where Science Meets Craft
Printers are passionate about every job looking the best it can. For decades, 3M products have been there helping to improve the quality of the work that goes out and the efficiency of how it gets done.
Typical properties
| Adhesive Type | Acrylic |
| Air Release | Yes |
| Backing Material | Foam |
| Brands | Cushion-Mount™ |
| Industries | |
| Print Quality | Combination Printing - Medium Soft |
| Product Color | Yellow |
| Product Form | Roll |
| Total Tape Thickness without Liner (Imperial) | 20 mil |
| Total Tape Thickness without Liner (Metric) | 0.508 mm |
| Units per Case | 1.0 |
| Overall Length (Imperial) | 36 yd |
| Overall Length (Metric) | 32.918 m |
| Overall Width (Imperial) | 18 in |
| Overall Width (Metric) | 457.2 mm |
Resources
3M™ Cushion-Mount™ Pro Plate Mounting Tapes with Comply™ with Easy Mount Adhesive 21320Data Sheets
(PDF, 81KB)
Large Volume Order
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
