3M™ Accuspray™ ONE Pro Spray Gun Kit for PPS™ Series 2.0, 26578, 4 kits per case
- 3M ID 7100158715
- UPC 00051131265783
Details
Highlights
- Features Accuspray™ ONE Spray Gun - ONE gun meets all of your spraying needs
- Includes five (5) replaceable atomizing heads in 2.0 mm (red), 1.8 mm (clear), 1.4 mm (orange), 1.3 mm (green) and 1.2 mm (blue) for spraying of primer, sealer, base and clear coat
- Fast, simple head replacement affords the performance of a brand new spray gun on demand
- Atomizing heads can be used on any Accuspray™ replaceable atomizing head spray gun
The 3M™ Accuspray™ ONE Spray Gun for 3M™ PPS™ Series 2.0 combines the simplicity and easy maintenance of the Accuspray™ spray gun with the material-saving, rapid clean-up convenience of PPS™ Series 2.0, the next generation, highest performing disposable spray cup system. Replaceable atomizing heads afford the performance of a new gun, on demand and at a fraction of the cost.
ONE System for Every Spraying Need
The 3M™ Accuspray™ ONE Spray Gun for 3M™ PPS™ Series 2.0 is the combination of convenience, versatility and efficiency. This system features the Accuspray™ ONE Spray Gun - a lightweight, composite spray gun body designed to eliminate the complexity of a traditional spray gun. This gun body has been engineered for enhanced durability in automotive and industrial environments. The spray gun uses a series of replaceable, see-through atomizing heads which can be reused 5-10 times and then simply removed and replaced. This affords the performance of a brand new spray gun, on demand and at a fraction of the price.
Replaceable Atomizing Heads for the 3M™ Accuspray™ ONE Spray Gun for 3M™ PPS™ Series 2.0
Our 3M™ Accuspray™ Atomizing Heads for 3M™ PPS™ Series 2.0 deliver the ideal atomization to a wide range of fluids and coatings applied with Accuspray™ ONE Spray Guns. Atomizing heads are available in five sizes: 2.0 mm (red), 1.8 mm (clear), 1.4 mm (orange), 1.3 mm (green) and 1.2 mm (blue). For sealers, basecoats and topcoats, we recommend 1.3 mm or 1.4 mm atomizing heads. Choose the 1.8 mm size for higher-viscosity materials such as primer, and the 2.0 mm size for heavy-duty applications using fluids like gel coats, adhesives, undercoats or industrial coatings. Always refer to your paint company’s recommendations. Fast, easy controls for fan diameter, fluid and air pressure on the Accuspray™ ONE gun allow for quick adjustment across jobs from spot repairs to full panel coverage requiring up to 12” vertical or horizontal spray patterns.
Along with the distinctive color, the fluid tip size is presented clearly on each atomizing head for fast, accurate selection. Atomizing heads are see-through to make it easy for technicians to determine that the head is properly cleaned.
Typical properties
| Air Consumption (Imperial) | 13 scfm |
| Air Consumption (Metric) | 368.16 L/min |
| Application | Coating spraying, Manual Spray Coating, Paint Application, Painting |
| Brands | Accuspray™ |
| Case Quantity | 4.0 per Case |
| Operating Pressure (Imperial) | 24.0 psi |
| Operating Pressure (Metric) | 1.65 bar |
Resources
PN26578 & PN26580 Manual - Americas LanguagesOther
(PDF, 1MB)
Reviews
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
