3M™ High Performance Double Coated Tape 9086 features a specially-formulated acrylic adhesive that delivers very high initial tack and excellent peel and shear performance on a wide range of surfaces and materials. At 3.5 mils per side, the adhesive bonds to smooth, rough or textured surfaces. A 0.5 mil tissue carrier is conformable and hand-tearable for efficient processing and use.
| Adhesive Type | Modified Acrylic |
| Application | Zero-Speed and General Splicing |
| Back Side Adhesive Thickness (Imperial) | 3.5 mil |
| Back Side Adhesive Thickness (Metric) | 0.09 mm |
| Back Side Adhesive Type | High Performance Adhesive 375 |
| Backing (Carrier) Material | Tissue |
| Backing (Carrier) Thickness (Imperial) | 0.5 mil |
| Backing (Carrier) Thickness (Metric) | 0.013 mm |
| Brands | 3M™ |
| Carrier Material | Tissue |
| Carrier Thickness | 0.5 mil |
| Carrier Thickness (Metric) | 0.013 mm |
| Face Side Adhesive Thickness (Imperial) | 3.5 mil |
| Face Side Adhesive Thickness (Metric) | 0.09 mm |
| Face Side Adhesive Type | High Performance Adhesive 375 |
| Indoor/Outdoor | Both |
| Industries | Converter Solutions, Point of Purchase, General Industrial, Signage |
| Master Size Length (Imperial) | 165 Linear Yard |
| Master Size Length (Metric) | 150.9 m |
| Master Size Width (Imperial) | 54 in |
| Master Size Width (Metric) | 137 cm |
| Maximum Operating Temperature (Celsius) | 121 ℃ |
| Maximum Operating Temperature (Fahrenheit) | 250 ℉ |
| Minimum Operating Temperature (Celsius) | -40 ℃ |
| Minimum Operating Temperature (Fahrenheit) | -40 ℉ |
| Primary Liner | Glassine Paper |
| Primary Liner Color | White |
| Primary Liner Thickness (Imperial) | 3 mil |
| Primary Liner Thickness (Metric) | 0.08 mm |
| Product Color | White |
| Product Form | Roll |
| Smallest Saleable Unit | Roll |
| Total Tape Thickness without Liner (Imperial) | 7.5 mil |
| Total Tape Thickness without Liner (Metric) | 0.19 mm |
| Units per Case | 18.0, 72.0 |
| Overall Length (Imperial) | 55 yd, 60 yd |
| Overall Length (Metric) | 50.29 m, 54.86 m |
| Overall Thickness (Imperial) | 7.5 mil |
| Overall Width (Imperial) | 0.5 in, 0.75 in, 1 in, 54 in |
| Overall Width (Metric) | 12.7 mm, 19.05 cm, 25.4 mm, 137 mm |
Other
(PDF, 102KB)
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Converter Markets Representative or a 3M Preferred Converter will contact you by phone or email.
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
3M™ High Performance Double Coated Tape 9086