3M™ Flexible Diamond QRS Cloth Roll 6002J
- | Select product options for IDs.
Details
Highlights
- Works well on a variety of materials: stone, glass, ceramic, carbides and composites
- Open dot pattern allows swarf and debris to escape, helping to prevent loading
- Available in three dot patterns and a variety of grades, so operators can choose the right abrasive for their unique project needs
- QRS Hook and Loop backing for easy tool attachment
- Flexible backing responds to edges and contours
3M™ Flexible Diamond QRS Cloth Roll 6002J was designed to tackle hard-to-grind materials like stone, glass, ceramic, carbides and composites. The diamond mineral and flexible backing make this abrasive a good match for a variety of hard-to-grind materials.
Open dot pattern allows swarf and debris to escape, helping to prevent loading
Our flexible diamond products, including 3M™ Flexible Diamond QRS Cloth Roll 6002J, are designed to help you achieve improved finishes on a wide range of hard-to-grind materials — without sacrificing cut rates. A metal bond securely anchors micron-graded diamonds to a premium flexible backing in an open dot pattern. This provides durability and long life, while allowing conformance to a variety of contours. In addition, the open dot pattern produces aggressive cutting action while reducing loading.
Use for a Variety of Metalworking Applications
3M™ Flexible Diamond QRS Cloth Roll 6002J is commonly used for a variety of hard-to-grind materials. We equipped this diamond abrasive with a hook and loop backing to make for easier abrasive to tool attachment. A series of loops are formed by pulling tufts of material through the scrim backing. Subsequently, these loops attach to hooks on the holder pad (sold separately). The hook and loop backing enables swift swapping of abrasives, especially when there are multiple abrasives in a sequence.
Three Patterns
3M™ Flexible Diamond QRS Cloth Roll 6002J comes in three patterns: 18, B2 and 21. Here's how to distinguish between the three: 18 is a small-dot pattern, designed for fine finishes; B2 is a medium-dot pattern designed for aggressive cutting action and has improved coolant flow, given the spacing of the dots; 21 is the largest dot pattern and it's ideal for applications where loading is a problem, as gaps allow swarf and debris to escape. Generally, larger dot patterns are more aggressive and will perform better in stock removal applications, whereas the smaller dot patterns will produce finer finishes, grade for grade.
Given its dual strength and flexibility, our 3M™ Flexible Diamond QRS Cloth Roll 6002J is a great abrasive for your metalworking needs — from grinding to finishing.
3M™ Superabrasives Product Guide (PDF, 1.95 Mb)
Typical properties
Resources
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
