3M™ Microfinishing Film Sheet 372L
- | Select product options for IDs.
Details
Highlights
- Micron-graded aluminum oxide abrasive mineral provides precise, uniform, close-tolerance finishes
- High friction coating on film backing (backsize) to prevent slipping
- Resin bond Sheet may be cut and shaped for hand pads or back up pads
- Ideal for metal, plastic, paint spot repair and automotive powertrain components
3M™ Microfinishing Film Sheet 372L is fast cutting and delivers a precise, uniform, close-tolerance finish. A high friction coating on 5 mil polyester film backing helps to prevent abrasive from slipping. Use on metal, plastic, paint spot repair, automotive power train components and more.
| Product | Mineral | Backing Caliper (0.001") |
Backside | Grades (Microns) | |||||||||||
| 9 | 15 | 20 | 30 | 40 | 45 | 50 | 60 | 74 | 80 | 100 | 125 | ||||
| 372L | Aluminum Oxide |
5 | Type S | • | • | • | • | • | • | • | • | • | |||
| 372L Type 2* (colored) |
Aluminum Oxide |
5 | Type S | • | • | • | • | • | • | • | |||||
| 373L | Aluminum Oxide |
5 | Type Q | • | • | • | • | • | • | • | • | • | |||
| 373L Type 2* (colored) |
Aluminum Oxide |
5 | Type Q | • | • | • | • | • | • | • | |||||
| 382L Type 2 (colored) |
Aluminum Oxide |
6 | Type S | • | • | • | • | • | |||||||
| 362L | Aluminum Oxide |
3 | Type S | • | • | • | • | • | • | • | |||||
| 272L** | Aluminum Oxide |
5 | Type S | • | • | • | • | • | • | • | • | • | |||
| 472L | Silicon Carbide |
5 | Type S | • | • | • | • | • | |||||||
| 675L | Diamond | 5 | Type S | • | • | • | • | ||||||||
| Diamond | 6 | Type S | • | • | |||||||||||
*Suggest to specify the 372L or 373L type 2 (colored) film whenever possible to assist with Error-proofing.
**European Lead Product. Plus wide rolls and belts globally.
A hard resin bond is durable and consistent and will produce consistent finishes and stock removal.
Recommended Applications
Miscellaneous abrasive applications (leather). In a sheet form, the film may be cut. This flexibility enables operators to reap the benefits of a microfinishing film and still tackle tough areas that might be inaccessible to other tools and machines.
Learn more about Metalworking solutions
Typical properties
Resources
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
