3M™ High Temperature Nylon Film Tape 855 is designed for high-temperature applications. The 3.2 mil thick tape features a non-silicone rubber adhesive on a tough nylon backing that applies easily, removes cleanly and withstands short temperature bake cycles of 400°F/204°C without leaving residue. This makes for faster anchorage during subsequent painting and bonding vs. silicone-based adhesives.
| Adhesion Strength (Imperial) | 55 oz/in |
| Adhesion Strength (metric) | 60 N/100mm |
| Adhesive Type | Rubber |
| Back Side Adhesive Thickness (Imperial) | 1.2 mil |
| Back Side Adhesive Thickness (Metric) | 0.03 mm, 0.05 mm |
| Backing (Carrier) Material | Nylon |
| Backing (Carrier) Thickness (Imperial) | 2 mil |
| Backing (Carrier) Thickness (Metric) | 0.051 mm |
| Backing Thickness (Imperial) | 2 mil |
| Backing Thickness (Metric) | 0.05 mm |
| Brands | 3M™ |
| Case Quantity | 24/case, 36/case |
| Elongation at Break | 4.6, 460 |
| Industries | Military & Government |
| Liner Color | White |
| Maximum Operating Temperature (Celsius) | 204 ℃ |
| Maximum Operating Temperature (Fahrenheit) | 305 ℉, 400 ℉ |
| Minimum Operating Temperature (Celsius) | 60 ℃ |
| Minimum Operating Temperature (Fahrenheit) | 60 ℉ |
| Number of Adhesive Sides | Single-sided |
| Product Color | White |
| Product Form | Roll |
| Product Type | Tape |
| Shelf Life in Months (From Date of Manufacture) | 18 |
| Smallest Saleable Unit | Roll |
| Specifications Met | ASTM D3330, ASTM D3652, ASTM D3759 |
| Tensile Strength (Imperial) | 31.0 lb/in |
| Tensile Strength (Metric) | 540 N/100mm, 560 N/100mm |
| Total Tape Thickness without Liner (Imperial) | 3.6 mil |
| Total Tape Thickness without Liner (Metric) | 0.091 mm |
| Units per Case | 12.0 Roll, 24.0 Roll, 24.0, 36.0, 36.0 Roll, 48.0 Roll, 72.0 Roll |
| Overall Height (Imperial) | 3.2 mil |
| Overall Height (Metric) | 0.1 mm |
| Overall Length (Imperial) | 72 yd |
| Overall Length (Metric) | 65.8 m, 65.83 m |
| Overall Thickness (Imperial) | 3.6 mil |
| Overall Width (Imperial) | 0.25 in, 0.5 in, 0.75 in, 1 in, 2 in, 3 in, 48 in |
| Overall Width (Metric) | 6.35 mm, 12.7 mm, 19.05 mm, 25.4 mm, 50.8 mm, 76.2 mm, 152.4 mm, 1219.2 mm |
Data Sheets
(PDF, 135KB)
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
| Overall Width (Metric) | 6.35 mm, 12.7 mm, 19.05 mm, 25.4 mm, 50.8 mm, 76.2 mm, 152.4 mm, 1,219.2 mm | |||
| Total Tape Thickness without Liner (Metric) | 0.091 mm | |||
| Overall Width (Imperial) | 0.25 in, 0.5 in, 0.75 in, 1 in, 2 in, 3 in, 48 in | |||
| Total Tape Thickness without Liner (Imperial) | 3.6 mil | |||
| Backing (Carrier) Material | Nylon | |||
| Product Color | White |
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
High Temperature Nylon Tape 855
3M™ High Temperature Nylon Film Tape 855
3M™ Polyimide Tape 8997
3M™ Polyimide Tape 8998
3M™ High Temperature Aluminum Foil/Glass Cloth Tape 363