3M™ Double Coated Polyester Tape 55256
- 3M Product Number 55256
- 3M ID B40070457
Details
Highlights
- High tack adhesive provides high initial adhesion and holding power to a variety of surfaces
- Thin polyester carrier provides dimensional stability and ease of handling, die-cutting, and laminating
- Recommended for foam and mesh lamination for small gaskets in electronics devices
- General purpose
3M™ Double Coated PET Tape 55256 is our 0.05 mm double sided tape with a high tack acrylic adhesive system on a polyester film carrier, with a 0.05 mm white single coated kraft liner for dimensional stability.
3M™ Double Coated PET Tape 55256 has improved handling, and ease of die cutting and laminating. Our high tack adhesive provides relatively high initial adhesion and good shear holding power to a variety of surfaces.
Typical properties
| Brands | 3M™ |
Resources
3M™ Double Coated PET Tape 55256POther
(PDF, 78KB)
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
