3M™ Fast Tack Water Based Adhesive 1000NF is a unique, water-based adhesive specially designed to deliver an effective combination of fast, heat resistant bonding, repositionability, and high ultimate strength. Its adhesive is non-flammable, polychloroprene-free, and has zero VOCs (per EPA test method 24).
A Faster Bonding Time
3M™ Fast Tack Water Based Adhesive 1000NF bonds quickly while achieving handling strength in approximately one minute or less. Along with its fast action, the potential for one-surface application also increases productivity while using less product.
Adheres to Many Materials
By formulating an adhesive that is 48% solids, 3M™ Fast Tack Water Based Adhesive 1000NF provides up to three times more coverage than solvent based adhesives. It adheres to many types of flexible foam, latex foams, fabric, polyester fiberfill, canvas, wood, plywood, particleboard, and many plastic and metal surfaces. It is certified to GREENGUARD® Product Emission Standard For Children and Schools for low-emitting interior building materials.
Recommended Applications
Adhesive can be applied by spray, brush or roller
Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.
| Application | Bond Countertop Laminate to Particle Board, Bond Wood Veneer to Particle Board |
| Application Method | Brush, Spray, Roll |
| Assembly Type | Large Surface Lamination |
| Brands | 3M™ |
| Container Size (Imperial) | 1 Gal. (US), 5 Gallon, 55 Gal. (US) |
| Container Size (Metric) | 4 Liter, 18.9 Liter, 208.2 Liter |
| Environmental Considerations | California Air Resources Board, GREENGUARD® Certified, SCAQMD, Helps contribute to LEED® credits, Low VOC, Ozone Transport Commission |
| Flame Retardant | Non-flammable |
| Heat Resistance | 300 Degree Fahrenheit |
| Heat Resistance (Celsius) | 149 °C |
| Industries | General Industrial, Furniture, Appliance, Construction, Specialty Vehicle, Transportation, Automotive, Electronics, Marine, Metalworking, Woodworking, Military |
| Open Time | 1 min - 10 min |
| Product Color | Neutral, Purple |
| Product Form | Bulk, Gallon |
| Smallest Saleable Unit | Bottle, Drum, Each, Canister, Case |
| Solids Weight Percent (Approximate) | 48 % |
| Substrate | Fiberglass Reinforced Plastic, Polystyrene Foam, Plastic (Polyolefins and Thermoplastic Elastomers), High Pressure Laminate, Fiberglass Insulation, Vinyl Plasticized, Metal, Polyolefin Foam, Hardwood, Wood, Fabric, Felt, Cork, Fibrous Glass, Paper, Cardboard, Flexible Foam (Latex, Urethane) |
| Surface Type | Wood |
Safety Data Sheets
Document Number: MSDS_3127388_US_EN
(PDF)
Safety Data Sheets
Document Number: MSDS_3127396_US_EN
(PDF)
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
