3M™ Fastbond™ Insulation Adhesive 49 is a fast-drying adhesive that bonds a range fabrics and insulation materials to a variety of substrates. This adhesive's aggressive tack, high initial grab, and permanent bond provides fast results to keep projects moving ahead, while its easy-to-dispense formula enables direct application onto surfaces and materials where needed, with no soak-in thanks to its high solids content. 3M™ Fastbond™ Insulation Adhesive 49 is a long-time member of 3M’s portfolio of go-to adhesives — find out why other industry professionals are choosing it for their project needs.
| Application | Bond Fiberglass Insulation to Metal, Insulation Attachment |
| Application Method | Spray, Brush, Roll |
| Assembly Type | Large Surface Lamination |
| Brands | Fastbond™ |
| Container Size (Imperial) | 5 Gallon, 100 Gallon, 255 Gallon |
| Container Size (Metric) | 18.9 Liter, 378.5 Liter, 965.28 Liter |
| Environmental Considerations | GREENGUARD® Certified, California Air Resources Board, Helps contribute to LEED® credits, Low VOC, Ozone Transport Commission, SCAQMD |
| Flame Retardant | Non-flammable |
| Full Cure Time | 24 hr |
| Heat Resistance Temperature (Celsius) | <204 °C |
| Heat Resistance Temperature (Fahrenheit) | <400 °F |
| Industries | General Industrial |
| Open Time | 30 sec - 30 days |
| Product Color | Transparent |
| Product Form | Bulk |
| Smallest Saleable Unit | Drum, Canister |
| Solids Weight Percent (Approximate) | 53 % - 57 % |
| Storage Temperature (Celsius) | 16°C - 27°C |
| Storage Temperature (Fahrenheit) | 60 °F - 80 °F |
| Substrate | Cardboard, Fabric, Felt, Fiberglass Insulation, Metal, Flexible Foam (Latex, Urethane), Leather, Rigid Foam (Beadboard Styrene), Rubber (Except EPDM), Plastic (ABS, PVC, Acrylic), Plastic (High Performance Nylon), Plastic (Polyolefins and Thermoplastic Elastomers), Hardwood, Wood, Cork, Fibrous Glass, Glass, Ceramic, Paper |
| Units per Case | 1.0 |
Safety Data Sheets
Document Number: MSDS_0940858_US_EN
(PDF)
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
