3M™ Fastbond™ Foam Adhesive 100NF is designed for optimal versatility, delivering permament bonds on a wide range of lightweight materials. This adhesive has a medium tack and a high solids content that supports its low soak-in property. When sprayed, this formula has a pebble pattern, is non-flammable in its wet state, and is easy to dispense; when not being sprayed, it can be applied directly by using a brush or roller. A staple in the 3M adhesive portfolio, discover why 3M™ Fastbond™ Foam Adhesive 100NF is recognized worldwide for its reliability when bonding foam to plastic, metal, wood, and much more.
Both CARB compliant and helping to contribute to LEED® credits, 3M™ Fastbond™ Foam Adhesive 100NF has been proven to work well for projects of all sizes and needs. Given that air quality control is an important factor for every industry, this adhesive offers excellent performance while minimizing environmental impact. Specifically, 3M™ Fastbond™ Foam Adhesive 100NF is certified to the GREENGUARD™ Product Emission Standard For Children and Schools for low emitting interior building material.
| Adhesive Type | Ethylene Vinyl Acetate |
| Application | Upholstery & Seating Attachment, Fastening Headliner & Ceiling Systems, Seat Assembly |
| Application Method | Roll, Spray, Brush |
| Assembly Type | Large Surface Lamination |
| Brands | Fastbond™ |
| Container Size (Imperial) | 5 Gallon, 55 Gallon, 270 Gallon |
| Container Size (Metric) | 18.9 Liter, 208.2 Liter, 1022 Liter |
| Environmental Considerations | Low VOC, Ozone Transport Commission, SCAQMD, Helps contribute to LEED® credits, California Air Resources Board, GREENGUARD® Certified |
| Flame Retardant | Non-flammable |
| Full Cure Time | 24 hr |
| Heat Resistance Temperature (Celsius) | <110 °C |
| Heat Resistance Temperature (Fahrenheit) | <230 °F |
| Industries | General Industrial, Furniture |
| Open Time | 30 sec - 20 min |
| Physical Form | Very thin liquid |
| Product Color | Neutral |
| Product Form | Bulk |
| Smallest Saleable Unit | Drum, Each |
| Solids Weight Percent (Approximate) | 44 % - 48 % |
| Storage Temperature (Celsius) | 16°C - 27°C |
| Storage Temperature (Fahrenheit) | 60 °F - 80 °F |
| Substrate | Fabric, Felt, Flexible Foam (Latex, Urethane) |
| Surface Type | Foam, Fabric |
| Units per Case | 1.0 |
Safety Data Sheets
Document Number: MSDS_0834325_US_EN
(PDF)
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
