3M™ Fastbond™ Contact Adhesive 2000NF is a high-solid adhesive that can provide immediate handling strength when used with 3M™ Fastbond™ Spray Activator 1. This low-odor adhesive is designed for maximum versatility, effectively bonding most flexible and rigid foams, plastic laminate, wood, plywood, particle board, fabrics, fiber, aluminum, galvanized steel, and many plastics — all without heat. Available in blue, light orange, or neutral color, 3M™ Fastbond™ Contact Adhesive 2000NF is a one-product solution for many bonding needs.
| Application | Adhering Floor Coverings, Large Surface Lamination Assembly, Floor Bonding, Carpet Attaching, Bond Wood Veneer to Particle Board, Bond Polystyrene Foam Panels, Bond Honeycomb Core to Metal, Bond Countertop Laminate to Particle Board |
| Application Method | Brush, Co-Spray, Spray, Roll |
| Assembly Type | Large Surface Lamination |
| Brands | Fastbond™ |
| Container Size (Imperial) | 5 Gallon, 5 Gallon, 55 Gallon, 270 Gal. (US) |
| Container Size (Metric) | 18.9 Liter, 208.2 Liter, 1022 Liter |
| Environmental Considerations | California Air Resources Board, GREENGUARD® Certified, Helps contribute to LEED® credits, Low VOC, Ozone Transport Commission, SCAQMD |
| Flame Retardant | Non-flammable |
| Full Cure Time | 24 hr |
| Heat Resistance Temperature (Celsius) | <148 °C |
| Heat Resistance Temperature (Fahrenheit) | <300 °F |
| Industries | General Industrial |
| Open Time | 30 min - 4 hr |
| Physical Form | Thin liquid |
| Product Color | Blue, Light Orange, Neutral |
| Product Form | Bulk |
| Smallest Saleable Unit | Drum, Canister |
| Solids Weight Percent (Approximate) | 47 % - 51 % |
| Specific Gravity | 1.1 |
| Storage Temperature (Celsius) | 16°C - 27°C |
| Storage Temperature (Fahrenheit) | 60 °F - 80 °F |
| Substrate | Cork, Fiberglass Reinforced Plastic, Hardwood, High Pressure Laminate, Leather, Metal, Plastic (ABS, PVC, Acrylic), Polyolefin Foam, Polystyrene Foam, Rigid Foam (Beadboard Styrene), Rigid Foam (Urethane), Rubber (Except EPDM), Wood |
| Surface Type | Polyurethane Foam, Laminate, Plywood, Wood |
| Units per Case | 1.0 |
| Viscosity Range (cps) at Room Temperature | 200-750 |
Safety Data Sheets
Document Number: MSDS_0652818_US_EN
(PDF)
Safety Data Sheets
Document Number: MSDS_0618629_US_EN
(PDF)
Safety Data Sheets
Document Number: MSDS_0612234_US_EN
(PDF)
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
