3M™ Hi-Strength Postforming Adhesive 94 CA is a strong adhesive that bonds a range of large surfaces and is perfect for large-scale laminations. This adhesive’s formula is easy to dispense and apply directly onto surfaces, with no soak-in or yellowing over time.
| Product | Application | Solids (%) | Solids — Bulk (%) |
VOCs without(g/L) |
Open Time (min) |
Spray Pattern |
Spray Applicator |
Recommended Tips |
| General Purpose | ||||||||
| 60CA | General Purpose | 43 | 42 | >80 | 2-80 | Web | Applicator | 9501,6501 |
| Speciality | ||||||||
| 70 | Construction, Marine,RV, Polystyrene |
21 | 41 | 544 | 1-60 | Web | Applicator | QSS tip |
| 74 | Foam Bonding | 22 | 36 | 563 | 1-15 | Web | Applicator | 9501,6501 |
| 74NF | Foam Bonding | 22 | 28 | 248 | 1-60 | Web | Applicator | 9501,6501 |
| 77 | Multi-Purpose | 27 | 36 | 534 | 1-30 | Mist | Applicator | 250050,650050 |
| 78 ET | Polystyrene | 17 | 31 | 570 | 1-60 | Web | Applicator | 9501,6501 |
| High Performance,High Temprature Laminating | ||||||||
| 90 | Laminating | 13 | 23 | 571 | 1-15 | Web | Applicator | 9501,6501,250050 |
| 92 | Laminating | 23 | 34 | 654 | 1-20 | Web | Applicator | 9501,6501,250050 |
| 94 CA | Laminating | 28 | 28 | 79 | 1-15 | Pebble | Applicator H | 4001,6501 |
| 94 ET | Laminating | 28 | 34 | <80 | 1-60 | Pebble | Applicator H | 9501,6501,4001 |
| 98 NF | Laminating | 20 | 25 | 254 | 1-60 | Web | Applicator | 9501,6501,4001 |
| Application | Adhering Floor Coverings, Fastening Headliner & Ceiling Systems, Insulation Attachment, Interior Gasket & Seal Attachment, Large Surface Lamination Assembly |
| Application Method | Spray |
| Assembly Type | Large Surface Lamination |
| Brands | 3M™ |
| Container Size (Imperial) | 26.2 lb, 128 lb |
| Container Size (Metric) | 11.9 kg, 58 kg, 85.3 kg |
| Environmental Considerations | SCAQMD |
| Flame Retardant | Flammable |
| Heat Resistance Temperature (Celsius) | <110 °C |
| Heat Resistance Temperature (Fahrenheit) | <230 °F |
| Industries | Specialty Vehicle, Furniture, Transportation, Woodworking, General Industrial, MRO |
| Open Time | 1 - 15 min |
| Physical Form | Liquid |
| Product Color | Red, Transparent |
| Product Form | Cylinder, Aerosol |
| Smallest Saleable Unit | Cylinder, Case |
| Solids Weight Percent (Approximate) | 28 %, 30 % - 40 % |
| Spray Pattern | Pebble |
| Surface Type | Metal, Rubber |
| Units per Case | 1.0 |
Safety Data Sheets
Document Number: MSDS_2213825_US_EN
(PDF)
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
