3M™ Extreme Sealing Tape 4412N is a translucent, highly conformable, single-sided, pressure sensitive acrylic adhesive tape with a high performance ionomer backing. It is an ideal solution for creating a water tight seal. It conforms over fasteners, seams, joints, holes and gaps to ensure a long-lasting seal on a variety of substrates.
| Adhesive Color | Transparent |
| Adhesive Type | Acrylic, Acryl Adhesive |
| Application | Roof Sealing |
| Application Method | Apply by hand |
| Back Side Adhesive Thickness (Imperial) | 4 mil |
| Back Side Adhesive Thickness (Metric) | 0.1 mm |
| Backing (Carrier) Material | Ionomer |
| Backing Material | Ionomer |
| Backing Thickness (Imperial) | 2 mil |
| Backing Thickness (Metric) | 0.05 mm |
| Brands | 3M™ |
| Core Size (Imperial) | 3 in |
| Core Size (Metric) | 76.2 mm |
| Density | 51 Pound Per Cubic Foot |
| Elongation at Break | 4 |
| Indoor/Outdoor | Both |
| Industries | Construction, Signage, Metalworking, Transportation, Specialty Vehicle, MRO, General Industrial |
| Liner Material | Polyester Film |
| Maximum Operating Temperature (Celsius) | 38 ℃ |
| Maximum Operating Temperature (Fahrenheit) | 100 ℉ |
| Minimum Operating Temperature (Celsius) | 4 ℃ |
| Minimum Operating Temperature (Fahrenheit) | 40 ℉ |
| Net Weight (Metric) | 0.78 kg, 1.3 kg, 1.32 kg, 1.52 kg, 1.74 kg, 15.42 kg |
| Primary Liner | Matte, Polyester Film |
| Primary Liner Thickness (Imperial) | 2 mil |
| Primary Liner Thickness (Metric) | 0.05 mm |
| Product Color | Translucent, White, Black, Gray |
| Product Form | Roll, Bag |
| Shelf Life in Months (From Date of Manufacture) | 12 |
| Smallest Saleable Unit | Roll |
| Specifications Met | ASTM D412 with Dogbone Die C, ASTM D-3330, ASTM D3759 |
| Tape Width (Metric) | 2.5 cm, 5.1 cm, 6.4 cm, 7.6 cm, 10.2 cm, 61 cm |
| Tensile Strength (Imperial) | 13.0 lb/in |
| Tensile Strength (Metric) | 87 kPa |
| Total Tape Thickness without Liner (Imperial) | 80 mil |
| Total Tape Thickness without Liner (Metric) | 2 mm |
| Units per Case | 1.0, 2.0, 3.0, 6.0, 9.0, 10.0 |
| Overall Height (Metric) | 2 mm |
| Overall Length (Imperial) | 1 yd, 18 yd |
| Overall Length (Metric) | 16.5 m, 165 m |
| Overall Thickness (Imperial) | 80 mil |
| Overall Thickness (Metric) | 2.03 mm |
| Overall Width (Imperial) | 1 in, 2 in, 2.5 in, 3 in, 4 in, 24 in |
| Overall Width (Metric) | 6.4 mm, 76 cm, 102 mm, 254 mm, 508 mm, 610 mm |
Other
(PDF, 90KB)
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
3M™ Extreme Sealing Tape 4412N