3M™ Cushion-Mount™ Plus Plate Mounting Tape E1220H
- | Select product options for IDs.
Details
Highlights
- Air release feature helps eliminate air bubbles under plates
- Plate side adhesive technology is designed to resist edge lifting on flexographic print plates
- Light density foam is ideal for combinations of solids and process with halftone dots
- Orange foam color indicates the light density foam
- Securely bonds flexographic photopolymer plates to print sleeves or steel cylinders to prevent plate edge lifting
- Has higher plate side adhesion for challenging print conditions with thick plates or small print sleeves
- Cross-hatch pattern from the release liner creates grooves in the adhesive to release air
- Plate demounts from double coated cushioned tape without adhesive residue
- Also removes cleanly from the sleeve or steel print cylinder
- For flexographic printing, flexographic printers
- Cushioned flexographic plate mounting sticky back foam tape
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1220H with easy mount adhesive is designed for mounting flexographic print plates to cylinders or sleeves. This 0.020 inch (0.51 mm) double coated orange foam mounting tape provides high quality light combination print.
Differential acrylate adhesive system on each side of a foam carrier, protected by a release liner on one side
- Mounting photopolymer plates to flexographic printing cylinders and sleeves
- Used in combination, process and solid printing processes
- 3M sticky back tapes are designed for wide-web presses to print film or paper for flexible packaging industry
3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high speed print runs.
Wide choice of adhesives, foams and thickness
On Easy with Reduced Air Entrapment
3M air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique micro-channels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting.
Keep the Presses Running and your Customers Coming Back
For decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done.
Typical properties
Resources
Reviews
Large Volume Order
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
