Ask a 3M Expert
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
3M™ Polyurethane Multi-Purpose Adhesive 5010, Cream, 310 mL Cartridge, 12/Case
- 3M Product Number 5010
- 3M ID 7000046612
- UPC 00048011628226
Details
Highlights
- High strength, fast curing adhesive that provides a lasting bond without long curing times
- One component moisture curing eliminates mixing and simplifies production processes
- Unique polyurethane formulation doesn't foam or create bond line expansion
- 3-5 minute open time; 30 minute clamp time; fully cures in 24 hours
- Paintable
3M™ Polyurethane Multi-Purpose Adhesive 5010 is a one component, fast curing adhesive which forms a rigid permanent bond. It is designed to bond wood to a wide variety of materials including wood, foam panels, metal and steel, some plastics, glass and fiberglass.
Create strong bonds with little or no foaming
Work quickly and precisely
Unlike alternative adhesives (top), 3M adhesive (bottom) exhibits almost no foaming or line expansion
3M™ Polyurethane Multi-Purpose Adhesive 5010 (PDF, 33.94 Kb) is a fast grabbing, 100% solids, one-part polyurethane based moisture curing adhesive for wood bonding. It features a fast, high-strength formulation that requires no heating or long set-up times to cure. With a 3-5 minute open time, and 30 minute clamp time, this adhesive fully cures in 24 hours to provide a long lasting bond. Once cured this adhesive is water resistant, making it ideal for both indoor and outdoor applications. This adhesive is low VOC, meets SCAQMD Rule 1168 and helps contribute to LEED® credits.
Recommended Applications
- Interior and exterior wood doors
- Wood or plastic decorative trim and moldings for furniture and cabinets
- Wood furniture component assemblies
- Anywhere a strong-bonding, low foaming adhesive is needed
Unique Formulation Doesn't Foam or Create Bond Line Expansion
3M™ Polyurethane Multi-Purpose Adhesive 5010 (PDF, 599.5 Kb) resists foaming and line expansion to produce a thin bond line that won't cavitate, though it is both paintable and sandable after curing. This unique, high-strength formulation will bond even dissimilar materials with little foaming to produce superior results. All you need is a standard caulking gun for precise, completely controlled application.
Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.
Typical properties
Resources
Reviews
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
