1. United States
  2. All 3M Products
  3. Adhesives, Sealants & Fillers
  4. Structural Adhesives
  5. Two Part Structural Adhesives
  6. 3M™ Channel Bonding and Sidelite Adhesive 08641, 47.3 mL Cartridge 6/Case

3M™ Channel Bonding and Sidelite Adhesive 08641, 47.3 mL Cartridge 6/Case

  • 3M ID 7000119888
  • UPC 00051135086414

Epoxy for bonding glass to metal or plastic on vehicles

Recommended for either stationary or movable glass applications

Rapidly curing epoxy gets a car ready for the road sooner

View more details

Details

Highlights
  • Epoxy for bonding glass to metal or plastic on vehicles
  • Recommended for either stationary or movable glass applications
  • Rapidly curing epoxy gets a car ready for the road sooner
  • Black color maintains O.E.M. appearance

3M™ Channel Bonding and Sidelite Adhesive securely bonds glass in both stationary and movable applications on automobiles. This high-performance, two-component black epoxy adhesive is both flexible and durable when bonding impervious surfaces such as glass to metal or plastic. This adhesive is black in color.

3M™ Channel Bonding and Sidelite Adhesive
3M™ Performance Manual Applicator
3M™ Channel Bonding and Sidelite Adhesive creates a secure bond between glass and other impervious materials such as metal or plastic.
3M™ Static Mixing Nozzle
3M™ Channel Bonding and Sidelite Adhesive creates a secure bond between glass and other impervious materials such as metal or plastic. Our two-part, black epoxy adhesive is rated for bonding both movable and stationary glass into place. This rapidly curing adhesive has a work time of 5 minutes, a clamp time of 1 hour and a cure time of 24 hours under typical environmental conditions. The quick-curing properties of this adhesive is a benefit compared to the hours or even days it often takes for one-part sealers and adhesives. The black color of the adhesive maintains the desired O.E.M. appearance.

Apply this adhesive with a 3M™ Performance Manual Applicator (part number 08190) and 3M™ Static Mixing Nozzle (part number 38191). This comprehensive mixing and application system provides precise placement of adhesive with no waste and more time savings.

PRECAUTIONARY INFORMATION:
Before using this product, please reference Product Label and/or Safety Data Sheet for Health and Safety Information. Note: Laws controlling the acceptable amounts of Volatile Organic Compounds (VOC's) vary by state, and in some cases by locality. For surface preparation and clean-up activities, consult federal, state and local regulations regarding use of products containing VOCs in your area.

Typical Performance Properties:
The following times have been determined with ambient air temperature and substrate temperature @ 70°F (21°C) and are considered typical values.
  • WORK TIME: 5 minutes
  • MIX NOZZLE DWELL TIME: 3.5 minutes
  • HANDLING/CLAMP TIME: 1 hour
  • CURE TIME: 24 hours
Directions for Use:
  • Preparation: Clean the side glass channel of dirt, oil, grease and moisture dry thoroughly. When bonding to a metal channel, first remove all rust. For optimum adhesion and corrosion resistance, prime all metal surfaces prior to applying seam sealer(s). If an acid-etch (self-etching) primer is used, a 2K epoxy or urethane primer must be applied before the application of the adhesive.
  • Clean the window glass of all dirt, oil grease and moisture using glass cleaner. Dry thoroughly.
  • If repairing a movable glass position the glass properly in the glass run channel and tape in place in the up position. If stationary glass prepare the pinch weld area as necessary, (be sure to pre-fit all parts prior to applying the adhesive).
  • Insert the cartridge into the applicator gun, remove the cap from the cartridge and dispense a small amount of adhesive until both parts A and B dispense equally.
  • Attach the mixing nozzle and dispense a small amount of adhesive through the mixing nozzle.
  • Apply the adhesive to one of the parts and assemble the parts within 3 minutes.
  • If bonding a movable glass leave the glass in the up position for 24 hours before using. If bonding a stationary glass fixture in place for 1 hour before using.
CLEAN UP:
Unmixed material may be cleaned from most surfaces with an appropriate VOC compliant product.
 

Typical properties

Adhesive Type

Epoxy

Application

Bonding

Brands

3M™

Case Quantity

6

Consistency

Paste

Container Size (Imperial)

1.6 fl oz

Container Size (Metric)

47.3 mL

Container Type

Cartridge

Cure Time

24 hr

Paint Time

24 Minute

Smallest Saleable Unit

Each

Time to Handling Strength

1-2 hours

Volume (Imperial)

1.6 fl oz

Volume (Metric)

47.3 mL

Work Life

10 min

Resources

Safety Data Sheets

Document Number: MSDS_2809911_US_EN

(PDF , 0B)

Reviews

Connect with us. We’re here to help.

Need help finding the right product for your project? Contact us if you need product, technical or application advice or want to collaborate with a 3M technical specialist

Message us

We welcome your questions and comments about 3M Products and only use the information you provide to respond to your message.

The information you provide on this Contact Us form will be used to respond to your request and as further described in our Internet Privacy Policy.

Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use the Contact Us system.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.