3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8805LH is a low-odor, non-sag, toughened, two-part acrylic adhesive. This adhesive is an ideal choice for a wide variety of industrial and commercial applications since it reaches structural strength twice as fast as most other competitive acrylic adhesives with a comparable open time.
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
5 Minute Work Life with 10 Minutes to Structural Strength
Making work safer, faster, and more efficient, that's just a few of the benefits of our 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8805LH. With a 10:1 mix ratio and a 5-minute work life there's time to position substrates prior to adhesion. Once fully cured it will reach 1,000 psi (7 MPa) of overlap shear strength in just under 10 minutes, half the time of similar adhesives, increasing throughput and productivity while featuring high peel and impact performance.
Recommended Applications
Provides a Safer Work Environment
With lower odor and non-flammable properties, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8805LH contributes to a safer work environment compared to typical acrylic adhesives. Added non-sag properties assure the adhesive is applied exactly where you want it and won't migrate during the application or bonding processes. And the 18-month room temperature shelf life of the product simplifies inventory management. Full cure will be reached within 24 hours, remarkably faster than any other acrylic adhesive on the market.
Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. Acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life
| Adhesive Type | Acrylic |
| Application | Impact Resistance, Bonding |
| Bond Flexibility | Rigid |
| Brands | Scotch-Weld™ |
| Consistency | Liquid |
| Container Size (Imperial) | 1.69 fl oz |
| Container Size (Metric) | 50 mL |
| Container Type | Cartridge |
| Cure Temperature | Room Temperature |
| Cure Time | 24 hr |
| Industries | Consumer Goods, Electronics, MRO, Signage, Specialty Vehicle, Plastic, Transportation |
| Open Time | 4 - 6 min |
| Physical Form | Flowable Liquid |
| Product Form | Each |
| Set Time | 6 min - 8 min |
| Shear Strength | 3900 psi |
| Smallest Saleable Unit | Each |
| Storage Temperature (Celsius) | 27°C |
| Storage Temperature (Fahrenheit) | 80 Degree Fahrenheit |
| Surface Type | Painted, Oily, Powder Coated, Smooth, Very Rough |
| Time to Handling Strength | 6 min - 8 min |
| Volume (Imperial) | 1.7 fl oz |
| Volume (Metric) | 50 mL |
Safety Data Sheets
Document Number: MSDS_3312832_US_EN
(PDF)
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
