Standard Abrasives™ Industrial Scouring Hand Pad, 827520, 6 in x 9 in, 20/Pack, 60 ea/Case
- 3M ID 7000046756
- UPC 50051115325293
Details
Highlights
- Built for tough cleaning and scouring applications
- Sharp aluminum oxide mineral removes light oxidation and rust
- Tough and durable high grade resin system stands up to wear and tear, prolonging abrasive service life
- May be used dry or with solvents or water-based detergents
- A good alternative to steel wool, files, scrapers, wire brushes and sandpaper sheets
Standard Abrasives™ Industrial Scouring Hand Pad is designed for hand applications such as deburring, polishing, cleaning, finishing, and surface preparation on metal, composite or plastic surfaces.
Pad features a tough and durable high grade resin system
A Standard Abrasives™ Easy Hand Pad Holder (sold separately) provides efficient and more comfortable hand sanding
Recommended Applications
Standard Abrasives™ Industrial Scouring Hand Pad is your partner in ridding substrates of blemishes, light oxidation and rust. Commonly used in industrial cleaning and scouring applications, this pad may be a helpful abrasive to operators across industries, including the food service industry.
A Steel Wool Alternative
Standard Abrasives™ Industrial Scouring Hand Pad is a great alternative to steel wool, files, scrapers, wire brushes and sandpaper sheets. The high grade resin system is strong and durable, yet the open web is soft and pliable, too. Nylon fibers on the pad will not splinter, as steel wool tends to do, which helps enhance operator comfort and safety. The fibers are interspersed with sharp-cutting aluminum oxide mineral: a sharp and friable mineral that fragments under heat and pressure to reveal sharp cutting edges. While nylon fibers break down, fresh mineral is exposed, so the abrasive cuts sharper for longer. As you apply even and persistent pressure, a consistent scratch pattern is revealed. These nonwoven fibers are also spongy and responsive, so they minimize gouging or marring of the workpiece.
Ease of Use
Standard Abrasives™ Industrial Scouring Hand Pad may be used dry, with solvents or with water-based detergents, depending on your application and project needs. Using these compounds may help wash away unwanted swarf and debris while you clean. Moreover, the hand pad may be fastened to a hand pad holder (sold separately) to enhance grip and help reduce operator fatigue. The 6 by 9 inch pad may also be cut and shaped to fit smaller surface areas if desired. With up to 60 pads per case, the need for ordering replacements may also be reduced. Standard Abrasives™ Industrial Scouring Hand Pad effectively cleans and scours away the contaminants — helping you achieve desirable results.
Typical properties
Resources
Reviews
Large Volume Order
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
