Standard Abrasives™ Zirconia Square Pad 727465, 3 in x 3 in x 3/8 in, 1/4-20, 80, 100 ea/Case
- 3M ID 7100105447
- UPC 00051115413636
Details
Highlights
- Pad corners perform fast grinding, deburring, and polishing on channels, fillets and corners
- Folded abrasive cloth produces cushioned, chatter-free grinding
- Pad size is convenient for spotting on flat surfaces
- Mandrel use increases range and versatility
- Resin bond system provides good grain retention and life
The Standard Abrasives™ Alumina Zirconia Square Pad enables aggressive access to tight angles such as channels, fillets and corners. Featuring alumina zirconia mineral for more aggressive grinding and deburring, the pad has folded layers of abrasive cloth that provide fresh mineral as the corners wear away and absorb vibration to reduce chatter for smooth results.
Folded abrasive cloth produces cushioned, chatter-free grinding
A Standard Abrasives™ Alumina Zirconia Square Pad is constructed by folding strips of coated abrasive material over a metal eyelet to form a square abrasive pad. As the pad rotates, the corners provide fast biting action, wearing down to expose fresh mineral. Square pads run smoothly and offer great control and access for corner weld grinding and cleaning. They are a bit more aggressive than cross pads given their square design, so they're a good choice for tougher grinding and blending applications. Small size pads are ideally suited for tubes and internal diameters. These pads may be used with portable die grinders to facilitate easier and closer access to the workpiece, and the metal eyelet attaches to a mandrel — long or short — enabling the operator to tighten or extend the abrasive's proximity to the part.
Achieve a More Aggressive Cut
Alumina zirconia (AZ) fractures frequently to continually produce fresh sharp points and delivers a faster cut-rate than aluminum oxide. A man-made mineral, it was developed for heavy stock removal and high pressure grinding, making it an excellent choice for square pad applications. AZ mineral is adhered to the backing in a closed coat construction — meaning the mineral covers 100% of the backing. The greater grain density of this coated abrasive equates to smoother finishes.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives (PDF, 2.94 Mb) brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
Typical properties
Resources
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
