Genuine 3M™ File Belt Sander Replacement Parts keep your 3M™ File Belt Sander in top working condition. Every part is available to order, and finding the part you need is easy using the schematic and parts list found in the tool instruction manual.
Brands | 3M™ |
For Use With | 3M™ File Belt Sander 28366, 3M™ Orbital Sander 20331, 3M™ Orbital Sander 20430, 3M™ Orbital Sander 20431 |
Net Weight (Imperial) | 0.002 lb, 0.004 lb, 0.009 lb, 0.01 lb, 0.02 lb, 0.03 lb, 0.049 lb, 0.05 lb, 0.14 lb, 0.16 lb |
Net Weight (Metric) | 0.9 g, 1 g, 1.8 g, 4 g, 4.5 g, 9 g, 13.6 g, 22 g, 22.6 g, 63.5 g, 72.5 g |
Product Type | Air Guide, Arm Mount, Ball Bearing, Belt Cover & Latch Assembly, Belt Housing/Guard, Belt Tension Spring, Cylinder, Diffuser, Drive Pulley, Dust Cover, Endplate Assembly, Exhaust Cap, Exhaust Manifold, File Belt Drive Stud Adapter, File Belt Motor Spacer, Flat Head Screw, Gasket, Handle, Handle Grip, Housing, Inlet Adapter, Lever, Motor Case, Motor Seal, O-ring, Pin, Retaining Ring, Rotor, Rotor Vane, Rubber Drive Pulley, Screw - Socket Button Head Cap, Screw - Socket Head Cap, Shim, Spacer, Speed Control, Spring, Tracking Arm Post, Tracking/Control Knob, Valve, Valve Seat, Valve Spring, Valve Stem, Washer, Wrench |
Overall Height (Imperial) | 0.03 in, 13.97 in |
Overall Height (Metric) | 0.06 cm, 35.48 cm |
Overall Length (Imperial) | 0 in, 0.01 in, 0.02 in, 0.03 in, 0.05 in, 0.06 in, 0.08 in, 0.13 in, 0.15 in, 0.25 in, 0.3 in, 0.31 in, 0.39 in, 0.5 in, 0.75 in, 1.38 in, 5 in |
Overall Length (Metric) | 0.01 cm, 0.02 cm, 0.05 cm, 0.08 cm, 0.12 cm, 0.15 cm, 0.2 cm, 0.32 cm, 0.33 cm, 0.39 cm, 0.64 cm, 0.75 cm, 0.79 cm, 0.98 cm, 1.27 cm, 1.91 cm, 3.51 cm, 12.7 cm |
Overall Width (Imperial) | 1.97 in, 3.23 in, 3.25 in, 3.5 in, 5 in, 7.87 in, 8.66 in |
Overall Width (Metric) | 5 cm, 8.2 cm, 8.26 cm, 8.89 cm, 12.7 cm, 20 cm, 22 cm |
Regulatory Data Sheet
Document Number: MSDS_2953008_US_EN_RDS
(PDF , 0B)
Regulatory Data Sheet
Document Number: MSDS_2953453_US_EN_RDS
(PDF , 0B)
Regulatory Data Sheet
Document Number: MSDS_2953586_US_EN_RDS
(PDF , 0B)
Regulatory Data Sheet
Document Number: MSDS_2952281_US_EN_RDS
(PDF , 0B)
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.