3M™ Brake Hub Cleaning Disc Holder 07545, 6 ea/Case
- 3M ID 7000121093
- UPC 00051131075450
Details
Highlights
- Firmly holds 3M™ Brake Hub Cleaning Discs for rust removal on brake rotors and drums
- Features a hollow center, enabling operators to slide over and around wheel studs without damaging stud threads
- Product rated to 20,000 RPM
- Extended length enables access to areas between wheel studs
The 3M™ Brake Hub Cleaning Disc Holder is used to attach and hold Scotch-Brite™ Roloc™ Brake Hub Cleaning Discs to die grinders or right angle disc sanders. The 3M™ Brake Hub Cleaning Disc Holder and associated discs are designed to remove rust and corrosion from metal surfaces, particularly around wheel studs on brake drums or rotors.
Slide over and around wheel studs without damaging stud threads
We designed the 3M™ Brake Hub Cleaning Disc Holder as an essential piece of our brake hub cleaning product line. When used along with our Scotch-Brite™ Roloc™ Brake Hub Cleaning Disc, these components allow operators to achieve quick rust removal on the brake drums and rotors.
Easy Attachment
This disc holder attaches to any die grinder or drill and provides a hard supporting surface for your abrasive pads. Pads twist and lock tightly into the holder while still being easy to remove and change thanks to our Roloc™ attachment design. The holder's length and central hole allow you to remove rust around the wheel studs.
Clean Brake
Cleaning the brake hub is an important step in reducing the potential for misalignment between the hub and wheel. Misalignment between the brake hub and wheel can lead to drivability concerns like brake pedal pulsation or steering wheel shimmy. As corrosion may prevent proper hub and wheel alignment, 3M™ has designed the Brake Hub Cleaning products to give operators a quick and effective means of removing rust from brake rotors and drums, particularly around wheel studs.
Find More 3M™ Industrial Abrasives and Accessories (PDF, 4.29 Mb)
Typical properties
| Application | Grinding |
| Attachment Type | TS |
| Brands | 3M™ |
| Industries | Marine, Metalworking |
| Maximum Speed | 20000 mps |
| Net Weight (Imperial) | 0.12 lb |
| Net Weight (Metric) | 54.43 g |
| Product Color | Black |
| Product Type | Pad Holder |
| Shank Size | 0.25 in |
| Sub Applications | Right Angle Grinding |
| Overall Diameter (Imperial) | 1.25 in |
| Overall Diameter (Metric) | 31.75 mm |
| Overall Length (Imperial) | 3 in |
| Overall Length (Metric) | 7.62 cm |
| Overall Width (Imperial) | 2 in |
| Overall Width (Metric) | 5.08 cm |
Resources
Regulatory Data Sheet
Document Number: MSDS_2969673_US_EN_RDS
(PDF)
Reviews
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
