3M™ Fastbond™ Spray Activator 1 is used to enhance the bonding capabilities and handling strength without forced drying equipment for most applications. It is designed to specifically work with water based 3M™ Fastbond™ 2000NF Adhesive, 3M™ Fastbond™ Contact Adhesive 30NF and 3M™ Fastbond™ Foam Adhesive 100NF.
| Adhesive Type | Ethylene Vinyl Acetate |
| Application Method | Co-Spray |
| Brands | 3M™ |
| Composition | Water Borne |
| Environmental Considerations | California Air Resources Board, SCAQMD, GREENGUARD® Certified, Low VOC, Ozone Transport Commission, Helps contribute to LEED® credits |
| Flame Retardant | Non-flammable |
| Heat Resistance | 140 Degree Fahrenheit, 220 Degree Fahrenheit |
| Heat Resistance Temperature (Celsius) | 60.0 °C, 104.0 °C |
| Heat Resistance Temperature (Fahrenheit) | 140.0 °F, 220.0 °F |
| Industries | Packaging, Retail, Signage, Specialty Vehicle, Transportation, Automotive, Construction, Consumer Goods, Military & Government, Woodworking, Electronics, Furniture, General Industrial |
| Product Color | Transparent |
| Product Form | Pail, Bottle |
| Product Type | Activator |
| Smallest Saleable Unit | Canister, Bottle, Drum, Each |
| Units per Case | 1.0, 2.0, 6.0 |
| Volume (Imperial) | 1 gal, 30 qt, 33.814 fl oz |
| Volume (Metric) | 0.95 L, 1 L, 113.56 L |
Safety Data Sheets
Document Number: MSDS_0613125_US_EN
(PDF)
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
