Ask a 3M Expert
Close
3M™ Fire Barrier Water Tight Spray
- | Select product options for IDs.
Details
Highlights
- Meets UL Water Leakage Test, W-Rating— Class One requirements for systems tested and listed in accordance with ANSI/UL 1479
- Up to 3-hour fire protection in construction joints per ASTM E 1966 (UL 2079)
- Seals interior construction voids
- Superior washout resistance – Passes ASTM D 6904 24 hour exposure after 2 hour cure time
- Helps minimize noise transfer (STC Rated)
- CPVC compatible
Fire Barrier Watertight Spray is a sprayable, moisture-curing hybrid siliconized polymer that forms a tough, elastomeric coating. This material is used to firestop perimeter joints (curtain wall joints) and other construction joints that need to prevent fire and water from moving floor to floor.
Ideal for fire stopping areas that also require a water tight seal
3M™ Fire Barrier Watertight Spray helps control twill act as a barrier to water leakage and airborne sound transmission, while helping to control the transmission of fire, heat and smoke before, during and after exposure to fire. It is a sprayable, moisture-curing hybrid siliconized polymer that forms a tough, elastomeric coating. This material is used to firestop perimeter joints (curtain wall joints) and other construction joints that need to prevent fire and water from moving floor to floor. The spray meets UL Water Leakage Test, W Rating — Class 1 requirements for systems tested and listed in accordance with ANSI/UL 1479 and is tested in accordance with ASTM G 21 standard practice for determining resistance of synthetic polymeric materials to fungi. This spray provides remarkable adhesion on most construction surfaces, including: concrete, gypsum, metal, plastic, wood and insulation. The seal is for interior construction voids such as blank openings, metallic pipes, non-metallic pipes, cables, cable trays, insulated pipes, busways, HVAC vents and ducts, combos and construction joints.
Recommended Applications
- Firestopping
- Smoke sealing
- Water sealing
The Science of Better Fire Protection from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life — developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our adhesives, sealants, protective coatings, devices and the best ways to used them — including Fire Barrier Pass-Through Device Brackets to improve performance, and to help businesses like yours operate faster, better and more efficiently.
See more about 3M™ Fire Barrier Watertight Spray (PDF, 200.02 Kb)
Typical properties
Resources
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
