Scotch-Brite™ Surface Conditioning Disc Pack 920S, 5 ea/Case
- 3M Product Number 920S
- 3M ID 7100023499
- UPC 00048011182537
Details
Highlights
- Great for cleaning, coating removal, paint prep
- 2 and 3 inch diameter discs are well suited for finishing on smaller parts
- Variety of grades and minerals included in one pack
- Open web is load resistant, helping extend service life
- Open web responds to surface irregularities without altering geometry of the part
- Pack includes 922 and 923 disc pad holders
Scotch-Brite™ Surface Conditioning Disc Pack 920S contains a variety of discs designed to clean, finish, blend and deburr on most substrates. With this versatile pack, operators get the opportunity to test how different discs work with different surfaces.
Scotch-Brite™ Surface Conditioning Disc Pack 920S contains a variety of 2 inch and 3 inch diameter discs that can be used with a small right angle grinder (PDF, 275 Kb). The small diameter of these discs make them a good match for smaller workpieces that have hard-to-reach areas. Some are made with silicon carbide mineral and others are made with aluminum oxide mineral. All discs are color coded by grade to help operators reduce the risk for error. Grades range from super fine (SFN) to coarse (CRS).
Benefits of Open Web Abrasives
Nonwoven technology makes our Scotch-Brite™ abrasives (PDF, 457 Kb) unique. We intersperse abrasive mineral on synthetic fibers using resin — creating an open web construction. Spaces between the fibers permit excess material to escape, so the mineral does not get worn down by debris. It keeps the mineral cutting sharper longer, enhancing cut performance and increasing abrasive service life. The spring-like nature of the fibers works well on contours and responds to subtleties on the surface. Its responsive design effectively removes unwanted burrs, soils and contaminants without ruining the base material, so you get a consistent and uniform finish — part after part.
A Versatile Pack
We created these versatile packs as an economical solution for testing discs with different minerals and grades. Each application is nuanced. Factors like machinery or equipment, base material and part specifications all influence which abrasive should be used. That's why our Scotch-Brite™ Surface Conditioning Disc Packs were created — to help you find the right disc for you.
Typical properties
Resources
Reviews
Large Volume Order
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
