3M™ Trizact™ Hookit™ Blending Abrasive Disc
- | Select product options for IDs.
Details
Highlights
- RECOMMENDED APPLICATIONS: This disc is made for scuff sanding blend panels, texture matching orange peel, and refining fine-grade sand scratches prior to paint blending on adjacent panels
- PROFESSIONAL FINISHES: The P1000 grit enables smooth, fine finishes
- EXPERIENCE THE 3M™ TRIZACT™ DIFFERENCE: The 3M™ Trizact™ 3-dimensional mineral abrasive structures are uniformly distributed throughout engineered structures, meaning that as the structures wear, fresh, sharp mineral is exposed to keep the results consistent
- FAST AND EASY DISC CHANGEOVERS: Utilizes a hook and loop-style Hookit™ backing that firmly connects the disc while eliminating the dust and debris contamination that adhesive-backed abrasives can suffer from
- Flexible, it scuffs into valleys as well as tops of orange peeled textures without excessive leveling
- Always use moist, dust extraction switched off
Prepare blend areas for painting with consistent results using 3M™ Trizact™ Hookit™ Blending Discs. These foam-backed abrasive discs are designed for scuffing and sanding blend panels, texture matching orange peel, and removing sand scratches prior to paint blending on adjacent panels. Used damp, they eliminate the need for scuffing compounds or wet sanding abrasives.
3M™ Trizact™ Hookit™ Blending Abrasive Discs 1000 deliver a more predictable finish than traditional scuff sanding pads – producing a consistent matte finish with no shiny spots or burn through. Used for scuffing sanding blend panels, texture matching orange peel, and removing fine grade sand scratches - they produce a scratch pattern needed to help all base colors and clear coats cover and adhere.
To deliver long life and consistent cut, 3M™ Trizact™ abrasives are built with three-dimensional structures that continuously wear to reveal fresh, sharp abrasive mineral. They're virtually self-sharpening.
3M™ Trizact™ Hookit™ Blending Abrasive Discs 1000 are foam backed to help provide improved control and responsiveness during sanding.
Use the 3M™ Hookit™ attachment backing to attach the discs to a dual-action sander or hook-and-loop block.
Used damp, they eliminate the need for scuffing compounds or wet sanding abrasives.
Typical properties
Resources
Reviews
Connect with us. We’re here to help.
Similar products
| Overall Diameter (Imperial) | 6 in, 3 in | |||
| Overall Diameter (Metric) | 150 mm, 75 mm | |||
| Product Form | Disc | |||
| Grit | P1000 | |||
| Attachment Type | Hook & Loop | |||
| Abrasive Material | Silicon Carbide |
3M™ Trizact™ Hookit™ Blending Abrasive Disc
3M™ Hookit™ Pad, 05791, 1 per case
3M™ Perfect-It™ Foam Compounding Pad
3M™ Trizact™ Hookit™ Foam Disc 02087, 3 in, P3000, 15 Discs/Carton, 4 Cartons/CaseFor industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
